SEDC-E9 Laser Key Cutting Machine Database Update to V15.12
SEC-E9 laser automatic key cutting machine (Tablet Version USB Connection) database updated to V15.12. (05/03/2018) Software version: V14.0.7 Database version: V15.12 New update: This […]
May 2018
Yanhua Mini ACDP not obtain authorization 500 module solution
Problem: I’ve connected and registered Yanhua mini acdp, then test to read BMW CAS4 immo data. After connect the CAS4 adapter with mobile phone and […]
Top 5 Advantages of Yanhua Mini ACDP Key Programmer
Here we listed tops advantages of Yanhua Mini ACDP comparing other BMW key programming tools. 1.Built-in IMMO Help File ACDP App providing connection wiring […]
Tech support: Obdstar F102 Nissan IMMO & Dash
Obdstar F102 Nissan FAQs here will help you know if your model is supported or not. What is Obdstar F102 key programmer? It’s a OBD […]
CGDI Prog MB Newly Added NEC, ELV Repair, Simulate Key etc Adapters
CGDI company just released several new adapters for CGDI Prog MB Mercedes-Benz key programmer which are listed below: CGDI Prog MB NEC Adapter Can […]
How to Install Yanhua Mini ACDP App and Export data to PC
How to install Yanhua Mini ACDP key programmer App on Android/iOS mobile phones (PC version is not yet released) and export/backup data from mobile phone to laptop. […]
JMD Handy Baby II vs. Handy Baby Key Copy Machine
JMD company will roll out second generation key chip copy machine- Handy Baby II in September 2018. What’s new in Handy-baby II? Check the table […]
Yanhua Mini ACDP APP “Untrusted Enterprise Developer” Solution
Problem: I tried to download Yanhua Mini ACDP BMW App on my Android mobile home through scanning the QR code, but it does not allow […]
BMW Dashboard & Immo: Yanhua Mini ACDP or Xhorse VVDI?
Is the new Yanhua mini ACDP programming tool better than Xhorse VVDI2 BMW? If i want a tool for BMW. The cheap ACDP can works […]
How to Find and Write VAG 7th Byte CS with Tango Key Programmer
Find out and write VAG 7th Byte CS requires Tango software version 1.112 or above. Tango key programmer software updated to V1.112 on May 9th, […]
How to Add BMW FEM key with Yanhua Mini ACDP No Soldering
How to: add a BMW FEM/BDC smart key with Yanhua Mini ACDP BMW key programmer without soldering/welding. Preparation: Download Yanhua Mini ACDP app on your mobile phone/PC […]
How to Update Firmware of Keydiy KD-X2 Remote Maker
Easy guide to update the firmware of Keydiy KD-X2 remote maker/generator. Check below: Power on KD-X2 unit Download Mobile KD App on Android App store […]
OBDSTAR Tools Upgrade Announcement on May 10th,2018
OBDSTAR tools (X300 DP & X300 Pro3 key master full version) released new upgrade announcement on May 10th, 2018. New Released 1.Increased VOLVO IMMO function 2.Increased diagnosis […]
Program Lexus ES 300 2013 All Keys Lost with VVDI Prog + Tango
How to Program Lexus ES300 year 2103 4-button smart key when all keys lost by using Xhorse VVDI Prog and Tango key programmer. Step 1: […]
OBDSTAR H110 Program VW Polo 2013 IMMO4 NEC24C32 Dealer Key by OBD
OBDSTAR H110 supports key programming on VAG 2th,3th, 3.5th, 4th, 5th generation immobilizer system. Here’s the guide to add VW Polo 2013 IMMO4 NEC 24C32 […]
BMW CAS4+ Add Key and All Keys Lost with CGDI Pros
About: How to add CAS4+ keys (and when all keys are lost situation), using CGDI key programmers. Optional tools: CG PRO 9s12, CGDI BMW, CG100 full-featured […]
Can I use Obdstar X300 DP on BMW CAS2 CAS3 CAS4?
Is it possible to add one key to BMW CAS2/CAS3/CAS4, using Obdstar X300 DP pad yellow version? On cas 2,3 we use tools like usually […]
SEC-E9 vs. Slica vs. Keyline Key Cutting Machine
Here’s the detail comparison among some great and reliable key cutting machines and key copy/duplicate machines. Locksmiths always have different priorities when selecting a machine. SEC-E9 vs. Laser […]