Yanhua Mini ACDP Failed to Clone DQ500 TCU?
Problem: I want write full backup on New DQ500 TCM from VW Tiguan but Yanhua Mini ACDP gave an error. Any idea? Answer: Boot version […]
Problem: I want write full backup on New DQ500 TCM from VW Tiguan but Yanhua Mini ACDP gave an error. Any idea? Answer: Boot version […]
Xhorse released a set of MQB48 solder free adapters to read VAG MQB NEC35XX immo data without soldering, no pin lifting and no cutting wire. It is […]
How-to: add a spare key to a 2013 Audi A3 MQB model with OBDSTAR X300 DP Plus. Tools used: Xhorse condor key cutting machine […]
This is a quick guide on how to determine the Audi BCM2 software version whether encrypted or not using the Autel IM608 II Pro. Question […]
Xtool tech released a new VAG Software update on September 10th, 2023. This update adds VAG MQB all keys lost programming. VAG IMMOBILIZER Software […]
How-to: Program 2013 Audi s4 BCM2 all keys lost key with Launch X431 tablet (X431 Pro5, PAD VII, IMMO Plus, IMMO Elite etc) and X-prog3 […]
Problem: On a VW Polo MQB 49 model 2019 failed to read immo data with Autel IM508, i have strong internet connection, try advanced mode, […]
Autel MaxiIM IM508 and IM608 series recently released VAG MQB NEC35XX locked immo data reading. The function requires XP400 Pro and APB130 adapter. The APB130 adap Compatible […]
How-to: add a spare MQB key to Seat Leon 2018 using Autel MaxiIM IM508 , IM608 PRO or IM608 Pro II key programmer. Don’t have […]
This is a VW Polo 2005, dashboard VDO 6Q0 920 803D. It is EDC15 I tried Xhorse VVDI2, the procedure is correct, but the key […]
How-to: add a spare key to VW Golf 7 using Autel MaxiIM IM508 & IM608 PRO key programmer. Cluster type: VDO NEC35XX Key type: […]
Launch X431 IMMO tablets supports VW Audi IMMO4, IMMO5, MQB and MLB platform gearbox module replacement function. Compatible devices: Launch X431 IMMO Pad/IMMO Pro/IMMO […]
Launch X431 IMMO tablets IMMO PAD/IMMO Pro/IMMO Plus/+ X-PROG3 programmer program key for VW MQB NEC35XX system. Launch X-Prog3 V10.80 Adds VAG MQB NEC35XX IMMO […]
Here comes the VAG VW Audi Skoda Seat MQB48 NEC35xx locked instrument cluster part number list of xhorse vvdi2 and vvdi key tool plus (requires VAG MQB license activated). Search your […]
We have introduced how to program VW VDO NEC+24C64 all keys lost with Autel IM508/IM608/IM608 Pro service mode via dump previously. Here we have another way to […]
I need to adapt a used cluster on a 2013 VW Jetta. This vehicle did not have a kessy module. Was a regular flip key […]
We have introduced how to read VAG MQB48 NEC35XX locked immo data and program key with xhorse vvdi2+ vvdi prog previously. Today we will continue to show […]
Yanhua Mini ACDP released module 29 for Audi 5th generation BCM2 add key and all keys lost. Support add key and all keys lost for 2013-2018 Audi […]
This is a 2015 Volkswagen Jetta all key lost situation. We gonna open the cluster assembly. The first step to more that wedge, screw it […]
What is a better tool to add key to VW MK5 year 2005 Visteon dashboard? Autel IM508 or FVDI clone? Autel: Need luck. Some […]
Question: Is it possible to program xhorse audi 754j smart key with Autel MaxiIM IM508/IM608? Answer: Yes, it can, the key cannot be cloned, you […]
Autel and sync data for VAG MQB system: If someone will save with Autel MaxiIM IM508/IM608/IM608 PRO/IM608 II the syncdata after preparing the dealer key, here are […]
Problem: Had generate a Xhorse XSMQB1EN with VVDI Mini Key Tool, but can not make a VAG MQB48 /49 system dealer key with IM508 + […]
Problem: Try to clone or add Vw Passat 2011 ID48 key with Autel IM508 but failed. Same message ‘UPDATE: cloned with mini key tool and […]
How to program a VW Passat 2010 all keys lost? What’s involved? 1.If with CCM module. There is MUCH easier way to do these Passat […]
Copyright © 2023 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com