Today we’re working on a 2025 Chery Arrizo 8. The car belongs to a taxi company. Our task is to add a spare key.
There are no risks associated with adding keys to these vehicles. It’s all done via the OBD2 port and takes 10 minutes.
Using xtool x100 pad3/pad2 device with KC501 programmer.
Read pin code ok.
Program key ok.
In this case, the owner needed the original key and a full rebuild (along with an emergency mechanical key for opening the door).
1. Open the car.
2. Read the PIN code.
3. Program the key.
4. Remove the lock.
5. Cut the key.
6. Reinstall the lock.
Below are photos of the process.
