Nacy – Car Key Programmer

autek-ikey820-software-for-ford-2018-and-toyota-g-and-h-chip-23

How To Activate New Software License to Autek ikey820?

October 21, 2019 Nacy 0

Most software upgrade is free, some you need to pay for the license to add these models to Autek ikey820 key programmer. Ford+ Toyota license […]

Program Mitsubishi Attrage 2016 Remote with OBDSTAR X300 DP Plus

October 19, 2019 Nacy 0

Program remote on a Mitsubishi Attrage 2016 by OBDSTAR X300 Dp Plus key programmer. Frequency 433MHz 1 original remote and 2 remote to be programmed […]

Autek iKey820 is good for Chrysler/Dodge/Jeep?

October 17, 2019 Nacy 0

Here, attach Autek iKey820 auto key programmer test reports on USA vehicles (Chrysler, Doge, Jeep) and vehicle list. Chrysler tests and car list Dodge tests and […]

Autek iKey820 is good at Ford & Mazda key Programming?

October 16, 2019 Nacy 0

Look here: How good Autek iKey820 is on Ford and Mazda? Attach iKey 820 auto key programmer reviews/test reports from users and vehicle coverage. Link: http://www.obdii365.com/wholesale/autek-ikey820-car-key-programmer.html […]

OBDSTAR X300 DP Plus Missing Odometer Software Solution

October 16, 2019 Nacy 0

Question: OBDSTAR X300 DP plus after update, cluster calibrate (odometer correction) menu is missing….. Anyone had some like this??? What to do how to get it […]

Tango V1.115 Toyota H Immo All Keys Lost Solution

October 15, 2019 Nacy 0

Original Tango key programmer new software V1.115 adds key maker Toyota H-immo all keys lost based on Barracuda Image Dump. 11 October, 2019 Version 1.115 […]

How to Renew Porsche Keys with Yanhua Mini ACDP?

October 15, 2019 Nacy 0

Question: What is the Porsche adapter used for? The adapter came with the Yanhua Mini ACDP Porsche package. Check picture: Answer: The Porsche Key interface […]

Program Dacia Duster 2018 4A Chip Key with OBDSTAR X300 DP PLUS

October 14, 2019 Nacy 0

Just done a Dacia Duster 2018 with obdstar x300 dp plus tablet, very fast in 7 minutes. Model: Dacia Duster 2018 Key: transponder key […]

Program MAN Truck 2005 Key with Orange5 and Tango

October 11, 2019 Nacy 0

Question: I have a MAN TGA year 2005 with FFR. I need to write a new transponder to start the truck but i can’t find […]

How to use Autel APB112 Simulator to Generate Toyota Smart key?

October 8, 2019 Nacy 0

How-to: program Toyota Camry all smart keys lost, generate simulator and add new smart key with Autel MaxiIM IM508and APB112 simulator. Vehicle Model: Toyota Camry 2016 […]

Program Holden Cruze 08-16 All Keys Lost with Lonsdor K518ISE

October 7, 2019 Nacy 0

Here’s the guide to do all keys lost on a 2008 – 2016 J300 First Generation Holden Cruze also known as a Chevrolet Cruze using Lonsdor […]

CGDI BMW Read and Write N13 ISN without Opening DME

October 4, 2019 Nacy 0

Here’s the guide to read and write BMW N13 ISN code using CGDI Prog BMW without opening DME shell. DME license and special DME cable […]

CGDI BMW read B58 ISN code without Opening DME

October 3, 2019 Nacy 0

To read ISN from B48 B58 with opening DME shell, you need to purchase DME license for CGDI Prog BMW key programmer. After activate DME […]

Which tool to Program Volvo Slot Key? Lonsdor or OBDSTAR?

October 2, 2019 Nacy 0

Question: Can lonsdor or obdstar program Volvo slot key ? Slot into dash type id46 key from picture is not keyless. (Keyless usually has 6 […]

Autohex II read BMW Msd85.1 ISN code on Bench

October 1, 2019 Nacy 0

Test report: BMW E series Msd85.1 ISN code bench reading success using Autohex II programmer. remove ECU set up bench connection upload ECU eeprom to […]

How to use FVDI 2018 to Find Passat B6 7 byte CS code?

September 30, 2019 Nacy 0

Here’s the guide to find the 7th byte component security (CS) code in the Passat B6 comfort module. To perform this operation with FVDI 2018, you […]

How to write Megamos 48 CS with Tango Key Programmer?

September 29, 2019 Nacy 0

This is an original Scorpio-LK Tango key programmer help file. Purpose: write Megamos 48 component security Component Security in Megamos 48 key The modern immobilizers […]

Autel IM608 adds Mazda 2018 2019, old Chrysler and More Toyota in Sep. 2019

September 28, 2019 Nacy 0

Keeping you Autel MaxiIM tools (IM608 IM508) up to date? Check these recent updates! (2019-09-20) Main Update:Mazda 2018-2019 Chrysler going back in time to cover older […]

How to use Tango Key Programmer to sync Volvo CEM?

September 27, 2019 Nacy 0

Purpose: This document here is aimed to show how to use original Tango key programmer to synchronize Volvo ECU and CEM Tango hardware: original Tango from scorpio-lk Tango software: version […]