Tutorial: How to read BMW Bosch MG1/MD1 locked B48/B58 DME ECUs with Autel MaxiIM IM508S/IM608 II.
ECU example: BMW B48 MG1CS201 locked TC298TP
Tools required:
Autel IM608 II/IM508S+ XP400 Pro
Autel G-box3 with DB15 cable
12V power supply
NOTE: To read ISN from BMW DMEs, you must use Gbox3. G-box2 is not working.
Procedure:
Go to System Selection- Engine- Direct Connection.
Input Bosch part number (i.e 0 261 S10 3GK) to detect ECU type: MG1CS201_LOCK TC298TP.
Autel will show you the wiring diagram.
Check if the diagram is the same as your ECU.
Connect Gbox3 DB15 cable wires with DME ECU. Connect 5 wires, GND, CAN-L, CAN-H, 12V.
Then connect DB15 cable with g-box3.
Connect 12V power supply to the G-box.
Then read EEPROM and Flash.
EEPROM data contains the ISN code.
If need to read ISN code, upload eeprom data to retrieve pin code.
If need a full data backup, read eeprom and Flash separately. Then write data.











