Nacy | Car Key Programmer Blog

Yanhua Mini ACDP not obtain authorization 500 module solution

May 29, 2018 Nacy 0

Problem: I’ve connected and registered Yanhua mini acdp, then test to read BMW CAS4 immo data. After connect the CAS4 adapter with mobile phone and […]

Top 5 Advantages of Yanhua Mini ACDP Key Programmer

May 28, 2018 Nacy 0

Here we listed tops advantages of Yanhua Mini ACDP comparing other BMW key programming tools. 1.Built-in IMMO Help File ACDP App providing connection wiring […]

Tech support: Obdstar F102 Nissan IMMO & Dash

May 25, 2018 Nacy 0

Obdstar F102 Nissan FAQs here will help you know if your model is supported or not. What is Obdstar F102 key programmer? It’s a OBD […]

CGDI Prog MB Newly Added NEC, ELV Repair, Simulate Key etc Adapters

May 24, 2018 Nacy 0

CGDI company just released several new adapters for CGDI Prog MB Mercedes-Benz key programmer which are listed below: CGDI Prog MB NEC Adapter Can […]

How to Install Yanhua Mini ACDP App and Export data to PC

May 23, 2018 Nacy 0

How to install Yanhua Mini ACDP key programmer App on Android/iOS mobile phones (PC version is not yet released) and export/backup data from mobile phone to laptop. […]

JMD Handy Baby II vs. Handy Baby Key Copy Machine

May 22, 2018 Nacy 0

JMD company will roll out second generation key chip copy machine- Handy Baby II in September 2018. What’s new in Handy-baby II? Check the table […]

Yanhua Mini ACDP APP “Untrusted Enterprise Developer” Solution

May 17, 2018 Nacy 0

Problem: I tried to download Yanhua Mini ACDP BMW App on my Android mobile home through scanning the QR code, but it does not allow […]

BMW Dashboard & Immo: Yanhua Mini ACDP or Xhorse VVDI?

May 17, 2018 Nacy 0

Is the new Yanhua mini ACDP programming tool better than Xhorse VVDI2 BMW? If i want a tool for BMW. The cheap ACDP can works […]

How to Find and Write VAG 7th Byte CS with Tango Key Programmer

May 16, 2018 Nacy 0

Find out and write VAG 7th Byte CS requires Tango software version 1.112 or above. Tango key programmer software updated to V1.112 on May 9th, […]

How to Add BMW FEM key with Yanhua Mini ACDP No Soldering

May 15, 2018 Nacy 0

How to: add a BMW FEM/BDC smart key with Yanhua Mini ACDP BMW key programmer without soldering/welding. Preparation: Download Yanhua Mini ACDP app on your mobile phone/PC […]

How to Update Firmware of Keydiy KD-X2 Remote Maker

May 12, 2018 Nacy 0

Easy guide to update the firmware of Keydiy KD-X2 remote maker/generator. Check below: Power on KD-X2 unit Download Mobile KD App on Android App store […]

OBDSTAR Tools Upgrade Announcement on May 10th,2018

May 11, 2018 Nacy 0

OBDSTAR tools (X300 DP & X300 Pro3 key master full version) released new upgrade announcement on May 10th, 2018. New Released 1.Increased VOLVO IMMO function 2.Increased diagnosis […]

Program Lexus ES 300 2013 All Keys Lost with VVDI Prog + Tango

May 10, 2018 Nacy 0

How to Program Lexus ES300 year 2103 4-button smart key when all keys lost by using Xhorse VVDI Prog and Tango key programmer. Step 1: […]

OBDSTAR H110 Program VW Polo 2013 IMMO4 NEC24C32 Dealer Key by OBD

May 9, 2018 Nacy 0

OBDSTAR H110 supports key programming on VAG 2th,3th, 3.5th, 4th, 5th generation immobilizer system. Here’s the guide to add VW Polo 2013 IMMO4 NEC 24C32 […]

BMW CAS4+ Add Key and All Keys Lost with CGDI Pros

May 7, 2018 Nacy 0

About: How to add CAS4+ keys (and when all keys are lost situation), using CGDI key programmers. Optional tools: CG PRO 9s12, CGDI BMW, CG100 full-featured […]

Can I use Obdstar X300 DP on BMW CAS2 CAS3 CAS4?

May 4, 2018 Nacy 0

Is it possible to add one key to BMW CAS2/CAS3/CAS4, using Obdstar X300 DP pad yellow version? On cas 2,3 we use tools like usually […]

SEC-E9-key-cutting-machine-cut-keys-(14)

SEC-E9 vs. Slica vs. Keyline Key Cutting Machine

May 3, 2018 Nacy 0

Here’s the detail comparison among some great and reliable key cutting machines and key copy/duplicate machines. Locksmiths always have different priorities when selecting a machine. SEC-E9 vs. Laser […]