2011 BMW 135i CAS3+ ISTAP All Keys Lost with Autel IM608
2011 BMW 135i all keys lost was done with autel maxiim im608! Tried first to do all keys lost through IMMO status failed because of […]
2011 BMW 135i all keys lost was done with autel maxiim im608! Tried first to do all keys lost through IMMO status failed because of […]
I have BMW 116 2014 FEM. Autel IM608 says that version information and that I must restore eeprom data first! someone has reopen fem and […]
Can Autohex II Read BMW MSV70 on Bench? Autohex does not require open msv70 ecu to read isn. Check the wiring diagram connect wiring […]
BMW 7 series 2004 ME 9.2.2 ECU clone boot mode (BDM mode) ok with hextag programmer. It is done in boot mode because factory mode […]
Can the OBDSTAR Bike tool program key immo BMW 2015 S1000RR? Add key not all keys lost. Transponder Tiris 4D+ (80 bit) Or any other […]
We had a customer who failed to read this Ecu BMW MSV80 with Hextag in 3 modes. He was trying to retrieve ISN for all […]
Problem: I have a problem with my Autel IM608 XP400. It is missing the Remote function. XP400 is well connected. My software version is v3.50. […]
I have read eeprom, modify eeprom and write eeprom modify with Autel IM608. After that replay clicking, try put original file and same problem and […]
Is there any way to unlock a used key pcf7945 for a 2011 Mini Cooper using Autel IM608? It said unlocking failed. Solution: With im608 […]
How-to: renew and unlock BMW F series CAS4 remote key with CGPro 9S12 programmer. CGDI BMW detected this used remote as Unlocked. Remove key shell and […]
Problem: Hi team, may you please assist. Under which ECU type must I read this with Yanhua Mini ACDP. I need to read Isn from this […]
Problem: I have a problem with Yanhua Mini ACDP when reading BMW CAS3/3+ by ICP and all pin detection passes, Why the data cannot be […]
Car model: BMW X5 (E70) Symptom: have just one key fob and emergency key, and I just had my first experience with locking the […]
Autel MaxiIM IM608 feedback: Add key for Mini Cooper 2011 CAS3+ istap no issues via OBD. Good to know: It is cas3++ istap, once I […]
Yanhua Mini ACDP or xhorse vvdi bimtool pro, Which one is better? You make your decision after viewing follow test report and reviews. 1) Acdp […]
Problem: I got the X-PROG3 immo add-on programmer for Launch X431 PAD VII. Pad 7 failed to add key on my BMW 2013 F30 320D […]
Autel MaxiIM IM508/IM608/IM608 Pro can read BMW ISN from DME in 3 modes: via OBD, on bench and boot mode. Obdii365.com here provides a supported […]
Question: Autel im608 has programmed a new key on a 2017 BMW 330i fem system (engine code is F48) successfully. On bench with a FEM […]
Launch X431 X-PROG3 Immo key programmer supports some BMW F chassis N20/N55/S63/N63 engine ECU ISN code read and write function, used for CAS4+ all keyys […]
I’m here just inform that obdstar X300 DP plus now supports reading CAS4 working similar as BMW explorer by obd successfuly. Unlocking procedure is reflash […]
Question: Is there any tool can read ISN from EGS of BMW E or F or G chassis? Answer: Autohex II BMW. Autohex II […]
Problem: I tried to add a key to a Mini Cooper 2009 CAS3++ ISTAP with OBDSTAR X300 DP Plus. It asks to update ISTAP function. […]
Problem: I’m doing bmw Cas 3+ (0L15Y) all keys lost with Autel MaxiIM IM608. I want to program a new key on bench. this is […]
Autel MaxiIM IM608 won’t do BMW Mini with EWS3. Tried all different ways, from reading it with another tool using the eeprom data etc. But it […]
Question: Is it possible to clone a fem unit from Bmw f20 2.0 diesel? Which tool and how to clone? Solution: It’s possible, […]
Copyright © 2024 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com