VW Golf 6 NEC24C64 AKL by Autel IM608 Service Mode with Gbox
We have introduced how to program VW VDO NEC+24C64 all keys lost with Autel IM508/IM608/IM608 Pro service mode via dump previously. Here we have another way to […]
We have introduced how to program VW VDO NEC+24C64 all keys lost with Autel IM508/IM608/IM608 Pro service mode via dump previously. Here we have another way to […]
I need to adapt a used cluster on a 2013 VW Jetta. This vehicle did not have a kessy module. Was a regular flip key […]
We have introduced how to read VAG MQB48 NEC35XX locked immo data and program key with xhorse vvdi2+ vvdi prog previously. Today we will continue to show […]
Yanhua Mini ACDP released module 29 for Audi 5th generation BCM2 add key and all keys lost. Support add key and all keys lost for 2013-2018 Audi […]
This is a 2015 Volkswagen Jetta all key lost situation. We gonna open the cluster assembly. The first step to more that wedge, screw it […]
What is a better tool to add key to VW MK5 year 2005 Visteon dashboard? Autel IM508 or FVDI clone? Autel: Need luck. Some […]
Question: Is it possible to program xhorse audi 754j smart key with Autel MaxiIM IM508/IM608? Answer: Yes, it can, the key cannot be cloned, you […]
Autel and sync data for VAG MQB system: If someone will save with Autel MaxiIM IM508/IM608/IM608 PRO/IM608 II the syncdata after preparing the dealer key, here are […]
Problem: Had generate a Xhorse XSMQB1EN with VVDI Mini Key Tool, but can not make a VAG MQB48 /49 system dealer key with IM508 + […]
Problem: Try to clone or add Vw Passat 2011 ID48 key with Autel IM508 but failed. Same message ‘UPDATE: cloned with mini key tool and […]
How to program a VW Passat 2010 all keys lost? What’s involved? 1.If with CCM module. There is MUCH easier way to do these Passat […]
Which tool to program VW Beetle 2015 all keys lost? 1.VVDI2: Failed Under key learn VVDI2 recognised the dash like Marelli with Motorola 9S12 […]
Problem: I have added keys to skoda octavia 2017 with xhorse vvdi key tool plus and car is still in learning mode. Try to reset […]
Here is the clue to program VW Jetta 2013/14 TSI ECU MED 17.5.20 to the car when old ECU got water damaged. Solution: One of […]
Most VW, Audi, Skoda, Seat cars after 2009 with VDO NEC clusters all keys lost can be done with Autel IM508/IM608/IM608 Pro via dump using APA102 clip […]
How-to: read VW Caddy Continental Simos PCR 2.1 ECU PIN, CS component security and Mac code with Autel IM608 using Gbox2 on bench. Connect ECU […]
2010 Volkswagen Passat CC how do I do the eeprom on it with Autel MaxiIM Im608/IM508? Open board, desolder 95320 chip and read chip. You cannot […]
Tutorial: how to program Audi A3 2016 new MQB key using xtool x100 pad2, pad3 or x100 elite. Key can be generated by Keydiy ZB […]
2014 VW Jetta kessy NEC 24c64 chip all keys lost is done with Autel IM608. First time I had to take cluster out. The only […]
How-to: program Audi A5 2012 remote key by obdstar x300 dp plus via OBD successfully. Procedure: Step 1: Read Immo data Step 2: Make dealer […]
VW Golf 7 2017/2018 KeylessGo add key successfully done by obdstar x300 dp plus and xhorse smart key. For MQB with blade you need original key only. […]
Audi A1 2017 VDO NEC 24C64 2014 all keys lost. Customer bought a dealer key at Audi before contacting me. I took the job even […]
Question: Audi s7 2013 bcm2 all keys lost, Autel IM508 got the cs code, generated dealer key, programmed proximity, key was written in the system, […]
Audi A3 2004 to 2013 all keys lost requires 7th byte CS code via eeprom. Here is the trick. The job can be done by Autel […]
Volkswagen Passat CC 2012 is done with Autel IM608 in Smart mode via obd. I programmed 3-4 of them with the 608. No problems, but […]
Copyright © 2024 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com