CGPro+ VVDI MB Tool Program Benz W220 All Keys Lost
How to program Mercedes Benz W220 all keys lost with CG Pro and VVDI MB tool? It has motorola key. Remove the EIS module. It […]
How to program Mercedes Benz W220 all keys lost with CG Pro and VVDI MB tool? It has motorola key. Remove the EIS module. It […]
CG Pro 9s12 allows changing BMW CAS1-CAS4 VIN via eeprom easily. Here is an example of CAS2. Select VIN function Open and upload eeprom […]
How-to: renew and unlock BMW F series CAS4 remote key with CGPro 9S12 programmer. CGDI BMW detected this used remote as Unlocked. Remove key shell and […]
Here’s the engineer solution to CG pro 9s12 programmer can not detect the key chip and shows error “No found key”. 1, First remove the […]
Look here: CG Pro, CGDI Prog BMW and CG100 – will all these CGDI programmers make key BMW EWS, CAS and FEM? How to […]
Good news!!! CG Pro 9S12 Programmer released a big update on June 5th, 2019. CG-Pro V2.1.3.0 software adds lots of chip types, Benz EIS-906 (ST12) IMMO […]
Model: Mercedes Benz B200 Chassis: W169 Year: 2010 Module: EIS Number: 1699051500 Chip: 9S12DT128-1L59W Device to read and replace: CG Pro 9S12 Programmer Procedure: […]
CG Pro 9S12 programmer adds Jaguar/Land rover KVM key programming (no need other devices) in previous software upgrade. Here’s a demo guide on adding a new […]
Report: A friend was trying to Read BCM porsche 2015 1N35H. MDP can Read but can not Write Xhorse VVDI Prog can not crack the […]
CGDI Prog BMW adds “BMW data Modify” function which is used for adapt the ecu donor. Its simple to do. Engine Model example: BMW F35 N20 engine […]
CG-Pro 9S12 freescale programmer software update to V1.6.0.0. CG Pro V1.6.0.0 (2018.08.04) 1.Add Immobilizer Land Rover Discovery 3 2.Add Dashboard Honda Fit High Honda Fit […]
CG Pro 9S12 is not only an eeprom/ecu programmer, but also mileage and key programmer. Here’s is the new test report on BMW 525Li CAS4+ […]
CG-Pro 9S12 freescale programmer newly updated Porsche key read& write function. How to Program Porsche key with CG-Pro programmer? Select Model-> IMMO Key Programming Click […]
About: How to add CAS4+ keys (and when all keys are lost situation), using CGDI key programmers. Optional tools: CG PRO 9s12, CGDI BMW, CG100 full-featured […]
Copyright © 2026 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com