OBDSTAR X300 DP Program Buick GL8 2017 Smart Key by OBD

Here’s little guide on programming smart key on a Buick GL8 year 2017 with OBDSTAR X300 DP tablet key programmer by OBD.



Connect OBDSTAR X300 DP with vehicle via OBD diagnostic socket

Turn ignition ON

Select Immobilizer->GM->GM v30.70->Immobilizer System->By Vehicle->select region, i.e Asia-> Buick->GL8->2017

obdstar-x300-dp-buick-gl8-2 obdstar-x300-dp-buick-gl8-3 obdstar-x300-dp-buick-gl8-4 obdstar-x300-dp-buick-gl8-5 obdstar-x300-dp-buick-gl8-6 obdstar-x300-dp-buick-gl8-7

Key Master DP will require security code to access

Send current screenshot, VIN and vehicle to be programmed picture to OBDSTAR engineer, they will send you security code.

Manually enter security code and confirm

obdstar-x300-dp-buick-gl8-8 obdstar-x300-dp-buick-gl8-9

Select Program Key


Turn ignition OFF

OBDSTAR X300 DP will ask to enter 4-digit pin code and confirm


Configuring system, wait for 10 minutes

Insert smart key to be programmed into card slot, take away other keys. Card slot position would be:
1. central console box
2. car cup holder console
3. car ashtray
4. car handgun box

obdstar-x300-dp-buick-gl8-12 obdstar-x300-dp-buick-gl8-13

Press on the Start button for 2 sec


X300 DP identifies current key number: 2


Program key success. Press YES to continue, NO to go back


Turn ignition ON but don’t step on pedal brake

Press on Start button for 8 sec until dash fully turns on

obdstar-x300-dp-buick-gl8-17 obdstar-x300-dp-buick-gl8-18

Program smart key success.


This site is protected by wp-copyrightpro.com

error: Contact www.obdii365.com