Xtool X100 Pad2 Program Dodge Dart 2013 Fobik Key

Success! Program fobik to Dodge Dart 2013 up using Xtool X100 Pad2 pro key programmer.

xtool-x100-pad2-dodge-dart-1

Connect X100 pad2 with vehicle

Turn ignition switch to ON position

Select Immobilizer function->Chrysler/Jeep/Dodge-> Proximity/Fobik (RFH) ->Dodge->Dart 2013- >Program keys

xtool-x100-pad2-dodge-dart-2

xtool-x100-pad2-dodge-dart-3

xtool-x100-pad2-dodge-dart-4

Turn on hazard light and turn ignition off

Select Fobik

Select Program Keys

xtool-x100-pad2-dodge-dart-5

Place a new Fobik into ignition. Ignition switch must be in the “LOCK” or “OFF” position

xtool-x100-pad2-dodge-dart-6

Xtool X100 pad2 requires to enter 4-digit pin code to access

xtool-x100-pad2-dodge-dart-7

Programming fobik in progress

Programming success

xtool-x100-pad2-dodge-dart-8

Test the new fobik

xtool-x100-pad2-dodge-dart-9

xtool-x100-pad2-dodge-dart-10

Done.

http://www.obdii365.com/producttags/xtool-x100-pad.html

 

This site is protected by wp-copyrightpro.com