CGDI Prog MB V2.8.6.0 adds CG Key Function

CGDI Prog MB Benz key programmer software update to V2.8.6.0.

CG-MB BenzMonster V2.8.6.0  NEW

(2019.07.20)

 

1. Adds infrared read EIS function. (requires simulation key)

2. Optimized the without gateway all lost collection function for the old 164 EIS. (more stable)

3. Adds the wiring diagram of old 164 EIS without gateway , modified the 204-204-212 EIS wiring diagram.

4. Adds the 21DF key write function. (Support the 57 key of the deputy factory on the market, support write the original key that VVDI erased)

5. Adds the CG key reading identification code function.

6. Adds the CG key exchange key frequency function.

7. Adds the CG key checking function.

8. Adds the CG key point collection function.

9. Adds the CG key point redemption function.

cgdi-mb-V2860-update

CG key for CGDI MB

for All Benz FBS3 Immobilizer 

1. Support Mercedes-Benz van power slide door.
2. Solved car start failure with 4 times continuous insertion and extraction
3. Solved VIN code problems for post-2009 ML series keys after use for a long/short time;
4. Solved Automatic activation failure from old Benz w210 w220 keys, if without a device for help.
5. Automatic exchange frequency between 315mhz-433mhz 
6. The CG Key is reusable
7. The key with 200 bonus points 
8. 200 bonus points as exchange for tokens to calculate password or any CG products.

cgdi-cg-key

http://www.obdii365.com/wholesale/cg-key-for-cgdi-mb-key-programmer.html

This site is protected by wp-copyrightpro.com

error: Contact www.obdii365.com