Module 24 function:
- Supports new JLR 2018+ OBD duplicate key (JPLA-14C104-AF)
Supports new JLR 2018+ program new key by replacing RFA black processor or RFA module
- When writing data to blank chip, you don’t need to solder wire. App has automatic pin detection. Refreshing data is safe and reliable.
- Yanhua ACDP platform can automatically detect the communication condition of RFA modules, including blank RFA modules and RFA modules after chip replacement.
- OBD programming, learning keys, simple and efficient.
JLR 2018+ OBD Duplicate key Function:
Menu path: Jaguar/Land rover Programming- Program Smart Key (2018-)- OBD Duplicate key
Identify system info
Program key (Add key)
Program key (All keys lost)
Identify key infor
Modify special key ID
OBD duplicate 2018- JPLA smart key requires JLR key which ID can be modified like the Lonsdor 2018-2021 JLR key.
Yanhua ACDP Module 24 JLR 2018+ program new key by replacing RFA black processor or RFA module
RFA write initial data
Confirm that the current module is a new RFA module or the main chip of the RFA module has been replaced with a new chip.
Module 24 contains the new chip, follow diagram to replace the new chip, no soldering required.
Replace RFA (JPLA/K8D2) Program Key
Add smart key (auto mode)
Add smart key (single step mode)
Change vehicle config data
Confirm that the vehicle has a new RFA module installed or the main chip of the RFA module has been replaced with a new chip and initial data has been written.
The replace RFA program key function cannot be performed if the current RFA module is locked.
Prepare at least two smarts keys that can be programmed.
If the car is in the alarm state, perform the function of Replace RFA program key after disabling the alarm.