OBDSTAR X300 Classic G3 programmed 2025 Nissan Magnite proximity smart key successfully.
Go to Nissan, select the model and Proximity function.
Select Program Keys.
This function requires network connection.
Follow 4 steps to program keys.
Press Start button to execute key programming function.
1. Configure system
Executing this function will erase all the keys of the vehicle.
Only 2 new keys can be programmed each time.
Insert the original key into the slot.
2. Read current key number
G3 read current number of key: 1.
Insert new smart key into the slot.
2 keys detected.
3. Verify PIN Code
G3 asks to enter a 32-digit PIN code.
This code must be obtained from a 3rd party provider using the VIN.
4. Program keys
Insert the proximity key 1 to be programmed into the slot.
Program key 1 successfully.
Insert a new proximity key to be programmed into the slot.
Program 2nd key successfully.
Test both keys.