How to Add Skoda Fabia 2019 MQB NEC35XX Key with Xtool X100 PAD3
Skoda Fabia 2019 with locked MQB NEC 35xx key programming successfully using xtool x100 pad3 via OBD. Connect x100 pad3 with vehicle. Select Skoda->Select […]
Skoda Fabia 2019 with locked MQB NEC 35xx key programming successfully using xtool x100 pad3 via OBD. Connect x100 pad3 with vehicle. Select Skoda->Select […]
How-to: read Porsche Continental BCM which was installed in all cars from 2011 to 2018 using Xtool tablet (X100 PAD3, X100 MAX, H6, H6 Pro, and […]
How to program Volvo xc60 2021 hybrid all key lost by xtool x100 pad3 and KC501 programmer. Select EEPROM Adapter->Read/Write ECU->Volvo->CEM(SPC5784G)->Operating instructions Check wiring […]
Tutorial: How to program Toyota 8A (H) Chip non-smart key all key lost using Xtool and M822 adapter. Tool used: Xtool InPlus IK618 (or X100 PAD3, […]
Xtool tech released a new VAG Software update on September 10th, 2023. This update adds VAG MQB all keys lost programming. VAG IMMOBILIZER Software […]
Xtool tech released 2019+ Toyota 8A/4A Smart Key Programming (Via key emulation & generation) function on Oct. 2022. Check Instruction below. Tools you need Xtool […]
Question: Can I use vvdi key or cgdi Mercedes key and program it with Xtool kc501 ??? Answer: Both Mercedes BE key and BGA key from VVDI […]
Here is the tutorial of how to use Xtool KC501 with X100 PAD3 key programmer to read remote frequency / transponder ID / chip type […]
The Xtool KC501 Key and Chip Programmer user manual for you all : About KC501 (Features and parameters) Read/Write the Chip (i.e Atmel AT24C01A, AT24C01A, […]
Purpose: add a Mercedes infrared key via OBD without having to disassemble anything. Tools use: Xtool X100 PAD3 + KC501 Chip and Key Programmer […]
The user manual of XTOOL KC501 key & chip programmer: Part 1: How to update XTOOL KC501? Part 2: How to use XTOOL KC501? ( […]
The Xtool KC501 chip and key programmer adds Mercedes Benz Infrared key function list on July 30th, 2020. Supports following Mercedes IR key programming: […]
Xtool KC501 Key & Chip programmer, working together with Xtool tablets, is an upgrade version of KC100 IMMO adapter. The following parts are about their […]
Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first. Device […]
Copyright © 2024 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com