Xtool X100C Program Ford Edge 2015 Key via iPhone

Here is the instruction on programming key for Ford Edge 2015 by Xtool X100C iOS/Anroid based key programmer dongle via iPhone.

 

Connect Xtool X-100 C dongle with OBD main test cable and insert into car OBD diagnostic socket

Xtool-X100C-key-programmer-1

xtool-x100c-program-ford-edge-key-1

Activate and pair Bluetooth (check  X100c User Manual)

Enter X100 C main menu

Select Immobilizer

xtool-x100c-program-ford-edge-key-2

Xtool X-100 C will detect vehicle automatically

Select Ford->Ford region (i.e China Ford)->Smart key system->Edge->2015-

xtool-x100c-program-ford-edge-key-3

xtool-x100c-program-ford-edge-key-4

xtool-x100c-program-ford-edge-key-5

xtool-x100c-program-ford-edge-key-6

Turn ignition switch to ON position, press OK to continue

xtool-x100c-program-ford-edge-key-8

Select Add a key

xtool-x100c-program-ford-edge-key-7

Open the hazard warning lights, press OK to continue

xtool-x100c-program-ford-edge-key-8

Please open the driver door, then close it. Then turn off the ignition switch, press OK to continue

xtool-x100c-program-ford-edge-key-9

Insert the key to be programmed into the card slot (slot in hand box or under cup holder next to the handbrake), press OK to continue

xtool-x100c-program-ford-edge-key-10

Program success. whether to program next one?
press yes to continue, press no to return.

xtool-x100c-program-ford-edge-key-11

Test the new smart key.

Copy Protected by Chetan's WP-Copyprotect.