Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

Here’s little guide to program  HITAG-PRO(ID49) chip remote key on a Ford Everest year 2015 when all keys lost using OBDSTAR X300 DP/Key Master DP tablet key programmer via OBD.

obdstar-x300-dp-ford-everest-1
Chip HITAG-PRO(ID49) Ford 2015+

obdstar-x300-dp-ford-everest-2
At least 2 keys are required

obdstar-x300-dp-ford-everest-3

Procedure:

Connect OBDSTAR X300 DP with vehicle via OBD diagnostic socket
Turn ignition to ON position
Select Ford/Lincoln V32.02->Ford->Immobilizer->Everest->2015->Type1->All keys lost

obdstar-x300-dp-ford-everest-4

obdstar-x300-dp-ford-everest-5

obdstar-x300-dp-ford-everest-6

obdstar-x300-dp-ford-everest-7
all keys will be erased, minimum 2 keys are required
Configuring system
Switch ignition off

obdstar-x300-dp-ford-everest-8

Press Hazard light
Open and close driver door
Configuring system

obdstar-x300-dp-ford-everest-9

1.Switch ignition off
2. Insert 1st key turn on 5sec
3.Insert 2nd key tun on 5sec

obdstar-x300-dp-ford-everest-10
Test remote and start

Success.

www.obdii365.com

Copy Protected by Chetan's WP-Copyprotect.