Super SBB2 Program Nissan Navara Remote Key Success

I’ve just added a 2-button remote key on a Nissan Navara by using Super SBB2 key programmer, very fast.

 

Hook up SBB2 host with vehicle via main test cable

super-sbb2-Nissan-NAVARA-1

Select Immobilizer function->Nissan->ZZNissan

super-sbb2-Nissan-NAVARA-5

super-sbb2-Nissan-NAVARA-3

Loading scan bin…

super-sbb2-Nissan-NAVARA-4

Select Immobilizer key function->NV200

super-sbb2-Nissan-NAVARA-6

Choose Type 1 (CAN)

super-sbb2-Nissan-NAVARA-7

Turn ignition switch to ON position

Press ENTER button to continue

Super SBB2 showed fail to connect. I might select the wrong system

So I want back and select “Type 2(KFP)”

Turn ignition ON again

This time SBB2 communicated with vehicle

Select Program Keys function

super-sbb2-Nissan-NAVARA-8

You have to complete the following procedure to add key:
1. Turn ignition off and remove key
2. Insert the first key and turn IGN on ofr 5 sec. Then turn IGN off and remove key

3. If you want to add more keys, please repeat the procedure

super-sbb2-Nissan-NAVARA-9

Super SBB2 program Nissan Navara remote key by OBD success.t

Test the remote control and start vehicle.

super-sbb2-Nissan-NAVARA-10

super-sbb2-Nissan-NAVARA-11

Done.

http://www.obdii365.com/

 

This site is protected by wp-copyrightpro.com