Possible to Program Dodge RAM Key with Xtool X100 PAD on bench?

Test:  xtool x100 pad bench programming Dodge RAM immobilizer function

Result: Success !

 

Disclaimer:

The test was carried out by Mexican expert. You are at your risk.

 

Instructions:

set up bench connection

xtool-x100-pad-dodge-ram-1

xtool-x100-pad-dodge-ram-1-1

xtool-x100-pad-dodge-ram-2-1

connect module with VCI module and x100 pad, connect another end to key lock EIS (with key inserted) and power supply

xtool-x100-pad-dodge-ram-3

xtool-x100-pad-dodge-ram-4

In X100 pad, select Immobilizer->Chrysler->Immobiliser/Fobik (WCM)->Auto detect

Auto detect Type 4

xtool-x100-pad-dodge-ram-5

xtool-x100-pad-dodge-ram-6

xtool-x100-pad-dodge-ram-7

Select Read security code

xtool-x100-pad-dodge-ram-8

Read pin code success

xtool-x100-pad-dodge-ram-9

Then choose to program new key/old key and follow xtool x-100 pad prompts until success.

Done.

This site is protected by wp-copyrightpro.com

error: Contact www.obdii365.com