Here’s the customer new feedback on Autel MaxiIM IM608 Benz software update v3.80.
Autel IMMO Benz Sprinter Update V3.80 (04/11/2019)
IMMO_Benz
1 Supports the following functions for G-Box: read lock information, repair hopping code, detect EIS status/working key, enable key, disable key, lock replacement (wipe, write, clear TP protection,
ativation, backup codes, write codes)
2.Support all key lost, all key lost (FAST) and key addition for Autel G BOX
3.Reads lock password (W203(K),W463(K),W202(K),W208(K),W210(K),W215(K),W220(K),W230(K)
4.Reads BE key password
5. Directional lock replacement (OBD): read, erase, write, synchronize, clear TP protection, activate/disable key, lock and unlock etc. Supports directional locks, W211(NEC), W209(NEC), W211(Motorola)
6. Fix hopping code, detect EIS status/working key, enable key,disable key, lock replacement (wipe, write, clear TP protection, activation, backup codes, write codes)
supports for no gateway completion(W164/-2008, W251/-2008, W164/2009-, W251/2009-,W169, W209/2006-,W211)
Mercedes update Feedback from Mr.Widlak.
Just finish testing 3 EIS AKL (all keys lost) with G-BOX:
W210- FAST MODE 4 MIN
W211- FAST MODE 23 MIN
W209- NORMAL MODE 51MIN (did not communicate. under fast mode)
Before update I was able to communicate with all 3 EIS but failed to read a password.
So looks like Autel engineers fix some issues.
I will check some OBD all keys lost soon.
I hope that will help
https://www.obdii365.com/wholesale/autel-maxiim-im608-diagnostic-programming-tool.html