Godiag GT100 breakout box assists Autel in making CAS4 key

GODIAG GT100 is able to help the AUTEL key programmer to make sure that its indicators Autel has good communication with the CAS4 ECU box.

Look at the following image:

-The left one is the Godiag GT100 breakout box;

-The testing platform is the middle parts (red PCB with a switch, 2 black adapters, 1 key coil). It will be a new testing platform with a shell made by the obdii365.com engineer.

 

– The right one is the CAS4 ECU box.

 

– Another one is Autel key programmer i.e IM608 /IM508 ( in the image it is a MD808 pro code reader because the IM608 is temporarily loaned out by my friend)

Autel Make Cas4 Key With Godiag Gt100 01

 

Press the switch of the testing platform, it will flash, when you put a working key into the coil, it will keep flashing.

Autel Make Cas4 Key With Godiag Gt100 02

 

The indicators on the Godiag GT100 breakout box will flash to indicator the CAS4 ECU is communicating fine with Autel.

Autel Make Cas4 Key With Godiag Gt100 03

 

Okay, next is to operate on Autel key programmer by following the on-screen instructions.

 

Enjoy!

 

www.obdii365.com

 

 

 

 

This site is protected by wp-copyrightpro.com