An Opel Astra H with all keys lost, have new key and pin code. Where to add that key? In PEPS, in CIM, in both? Tried to read key info with VVDI key tool, but it cant recognise it, I can check remote only and its working.
Finally done.
Procedure:
1. Read PIN using FVDI2018
2. OPCOM:
a. Enter immobiliser -> programming -> enter security code -> press start button
b. with ignition lights on, enter with OPCOM to PEPS -> programming -> programming -> enter security key
c. enter transponder learn mode. It will clear all keys
d. hold key next to transponder reading coil and press learn transponder
e. it will ask to press unlock button once, while holding to the coil
f. after successful learning, press display transponder info
g. if all OK, press close transponder learn mode
all working perfectly
Amazing what Opcom can do on Vauxhall/Opel the cheapest tool.