Question:
How can I make a file virgin on toyota using autel im508 and xp400?
To make a file virgin on a Toyota using Autel IM508 and XP400, follow the steps below:
Connect the Autel IM508 to the OBD2 port of the Toyota vehicle.
Turn on the Autel IM508 and select “IMMO” from the main menu.
Select “Toyota” from the list of available vehicle makes.
Select “Keyless System (CAN)” or “Smart System (CAN)” depending on the type of system in the vehicle.
Select “Erase Key” or “Reset Immobilizer” from the list of available options.
Connect the XP400 to the Autel IM508 via the USB cable.
Insert the key into the XP400 key programmer and select “Read Key” to read the key information.
Select “Erase Key” or “Reset Immobilizer” on the Autel IM508 and follow the on-screen instructions to complete the process.
Note: Before attempting to make a file virgin on a Toyota using Autel IM508 and XP400, make sure you have a good understanding of the process and have the necessary training and experience. Improper use of these tools can cause damage to the vehicle’s immobilizer system.