Autel IM608 2019 Ram DT 1500 Failed to Program Key?

Problem:

2019 Dodge Ram DT 1500. Autel IM608 pulled pin code but would fail every time to program key. I thought it was a key issue but another tool (code cannibal) programmed no problem. I used the same star cable for both tools.

I was successful with a Ram with autel before too, but seems like only certain part numbers are supported. I tried every variable with autel on this one and nothing worked.

Dodge Ram 1500 Key 2

Dodge Ram 1500 Key 1

Solution:

Autel doesn’t program key for Dodge Ram of the big radio. G2 turbo same thing.

The best tool to program key for this is Xtool. Never had a issue with xtool.

code cannibal or obdstar x300 dp plus will do it without problem as well.

obdstar will

 – Pull Pin Code – 2020 Dodge Ram 1500

– Requires Can Gateway Bypass Cable, Star Connector, or CanBus Probe
– Program Keys and Ability to Exit/Enter Transport Mode (Shipping Mode)

– Pull Pin Code – 2018-2020 Dodge Ram 2500

– Requires Can Gateway Bypass Cable, Star Connector, or CanBus Probe
-Program Keys and Ability to Exit/Enter Transport Mode (Shipping Mode)

 – Pull Pin Code – 2018-2020 Dodge Ram 3500

– Requires Can Gateway Bypass Cable, Star Connector, or CanBus Probe
– Program Keys and Ability to Exit/Enter Transport Mode (Shipping Mode)

This site is protected by wp-copyrightpro.com