How-to: program 2018 Nissan Rogue push to start all keys lost using Autel MaxiIM KM100 and universal ikey remote.
First will go to Universal key, excuse Nissan-> Rogue->2018, choose the E5 button Nissan Rogue 2013-2018 433MHz FSK/ID4A
we’ll click generate Universal key.
Universal key generation is complete.
we’ll press completed.
Then choose IMMO function.
Turn on the hazard lights
Open and close the door
Press ok to continue
I’m gonna go to enter smart system, select Remote control learning.
Delete all keys yes continue
Turn on hazard switch.
open and close the door
ignition is off
press ok
Autel KM100 is showing vehicle PCM code
There is a great risk in performing the IMMO functions use this function with caution.
okay usually if you get this message there’s a risk in performing key programming it can break the BCM and you would have to replace the BCM in that case.
so if you see this message I don’t really advise to continue for the sake of this post we’re going to carry through so say yes
place the small key to be learned against the ignition.
it’ll go ahead
Okay open and close the door
okay press the ignition switch once and within five seconds place the small key to be learned with its back against the ignition switch so that the instrument cluster will automatically light up
all right so we’re going to take the first key.
we’re gonna press the stop on one time.
the cluster should turn on and register the key.
one time clusters on carry light went out.
we’re going to say okay
Switch ignition off press it one time.
continue to program the next one I’m going to say no just want to do one key. press the stop on within five seconds put the key mark.
first program small key close to the button we do the same thing
I’m going to take the key and press the stop on.
security light is out.
programming complete check if the remote control is operating properly start the engine and wait for five seconds.
so we’re going to turn the ignition switch off
Rotate the steering wheel here. we’re gonna shut the ignition off steering lock registration complete.
We’ll set off the hazards
we’ll test out the key
lock
unlock
door
that’s okay lock
unlock
and we’ll try to start the car
No errors on the dashboard, starts and runs. Done.