Yanhua Mini ACDP Replace BMW FEM/BDC Module Guide
Yanhua Mini ACDP2/ACDP has got 2 methods to replace BMW FEM/BDC module without soldering. Require module 2 BMW FEM/BDC license activated. Copy data replace: this menu is […]
Articles by Nacy
Autel IM608 II Program 2021 Ford Range All Blade Keys Lost (Active Alarm)
How to program 2021 Ford Ranger blade key (old school 80bit) all keys lost with active alarm using Autel IM608 Pro II. […]
Which Tool to Program Mercedes W164 Amazonas EIS 2006- 2008 All Keys Lost
Mercedes Benz W164 has 2 types of EIS, Motorolla based and NEC based. The very early W164 models have Motorola which you can read by […]
Yanhua Mini ACDP BMW N20 DME Communication Error?
Problem: I was trying to read BMW N20 DME ISN with yanhua mini acdp and N20 interface board. But ACDP failed to read and said […]
CGDI BMW Read BMW E90 ISN and Replace CAS3 Module
Today we will show you how to make a replacement of the ECU unit on BMW CAS3 (i.e E90) using CGDI Prog BMW key programmer. Main […]
Yanhua Mini ACDP Failed to Clone DQ500 TCU?
Problem: I want write full backup on New DQ500 TCM from VW Tiguan but Yanhua Mini ACDP gave an error. Any idea? Answer: Boot version […]
OBDSTAR Update Hyundai Kia IMMO to 2023-
OBDSTAR X300 DP Plus and X300 Pro4 released new Hyundai Kia software in Nov. 2023. Add following immo models: Korea: AVANTE(AD) BLADE,REMOTE,PROXIMITY 2020- AVANTE(CN7) BLADE,REMOTE,PROXIMITY […]
CGDI BMW ‘Failed to Open Device’ Error Solution
Problem: CGDI Prog BMW failed to connect with vehicle, indicator did not turn on. When run CGDI software, it said failed to open device. Any […]
Yanhua Mini ACDP2 Add 2010 Porsche Cayenne Key 2M25J
How-to: add a spare key to 2010 Porsche Cayenne BCM 2M25J with Yanhua Mini ACDP2 programmer. Remove BCM module from vehicle Mask: 2M25J Connect […]
Autel KM100 Mazda CX-5 AKL Keyless Entry Malfunction Solution
Problem: I have a Mazda CX-5 ID49 all keys lost and program 1 universal key with Autel KM100 but it has a warning on the […]
Autel KM100 Program Kia Forte 2017 8A Smart Key
Autel MaxiIM KM100 program Kia Forte 2017 8A smart key successfully. Extract pin code and add a spare key successfully. It is done via obd […]
Yanhua Mini ACDP Failed to Read BMW N62 DME Solution
Problem: I was trying to read BMW N62 Me9 DME engine data with Yanhua Mini ACDP using the interface board, but it failed me. Error […]
How to Use Xhorse MQB48 Solder Free Adapters?
Xhorse released a set of MQB48 solder free adapters to read VAG MQB NEC35XX immo data without soldering, no pin lifting and no cutting wire. It is […]
Lonsdor Autel Xtool Zed-Full and SmartPro Reviews
There comes an unbiased review of some popular key programming tools by a real UK locksmith who has 10-year working experience. Lonsdor K518– […]
How to Add 2013 Audi A3 MQB Key with OBDSTAR X300 DP Plus?
How-to: add a spare key to a 2013 Audi A3 MQB model with OBDSTAR X300 DP Plus. Tools used: Xhorse condor key cutting machine […]
Program Volvo XC60 2021 All Key Lost by Xtool X100 PAD3
How to program Volvo xc60 2021 hybrid all key lost by xtool x100 pad3 and KC501 programmer. Select EEPROM Adapter->Read/Write ECU->Volvo->CEM(SPC5784G)->Operating instructions Check wiring […]
Which Tool to Program 2008 Porsche Cayman PAS All Keys Lost?
Problem: 2008 Porsche Cayman all keys lost. PAS immo module (Bosch m5x5 box above pedals). Not a KESSY car. Found a ST 24C08 chip in […]
Autel IM608 Adds 2015- Benz FBS4 ECU Cloning
We’re thrilled to announce the launch of Autel’s cutting-edge Mercedes ECU software, bringing you enhanced capabilities for Mercedes-Benz FBS4 vehicles. Key Features: – Engine ECU Data […]
How to Check and Update BMW FEM/BDC Version by Autel IM608 II?
It’s very useful to check and upgrade BMW FEM or BDC software version with Autel IM608 Pro II before attempting key programming or removing the […]
How to Check if Audi BCM2 is Encrypted or Not by Autel IM608 II?
This is a quick guide on how to determine the Audi BCM2 software version whether encrypted or not using the Autel IM608 II Pro. Question […]
Xtool IK618 Program Toyota 8A Blade All Keys Lost via M822 Adapter
Tutorial: How to program Toyota 8A (H) Chip non-smart key all key lost using Xtool and M822 adapter. Tool used: Xtool InPlus IK618 (or X100 PAD3, […]
Yanhua Mini ACDP Cannot Open App Solution
Problem: I failed to open Yanhua Mini ACDP2 app on Android mobile phone. After accepting the authorized privacy policy, it stuck on the main interface. […]
Yanhua Mini ACDP Adds Volvo 2022- Key Programming
Yanhua Mini ACDP2/ACDP1 released new software license A303 for module 20 to program Volvo 2022- keys. Features: Read CEM data by ICP mode without soldering […]
Yanhua Mini ACDP BMW MSD81.2 No ExtFlash Found?
Problem: I was trying to clone BMW MSD81.2 DME with Yanhua Mini ACDP, but it said no ExtFlash found. Does it support MSD81.2 cloning? Solution: […]
Yanhua Mini ACDP Clear ISN “EGS Version does not Support” Solution
Problem: BMW F10 trying to clear ISN with Yanhua mini acdp, but had an error “EGS version does not support”. Any solution? Solution: 1.EGS version […]