How to Add Audi BCM2 Encrypted Key with Yanhua Mini ACDP?
Yanhua Mini ACDP released module 29 for Audi 5th generation BCM2 add key and all keys lost. Support add key and all keys lost for 2013-2018 Audi […]
Yanhua Mini ACDP released module 29 for Audi 5th generation BCM2 add key and all keys lost. Support add key and all keys lost for 2013-2018 Audi […]
This is a 2015 Volkswagen Jetta all key lost situation. We gonna open the cluster assembly. The first step to more that wedge, screw it […]
What is a better tool to add key to VW MK5 year 2005 Visteon dashboard? Autel IM508 or FVDI clone? Autel: Need luck. Some […]
Question: Is it possible to program xhorse audi 754j smart key with Autel MaxiIM IM508/IM608? Answer: Yes, it can, the key cannot be cloned, you […]
Autel and sync data for VAG MQB system: If someone will save with Autel MaxiIM IM508/IM608/IM608 PRO/IM608 II the syncdata after preparing the dealer key, here are […]
Problem: Had generate a Xhorse XSMQB1EN with VVDI Mini Key Tool, but can not make a VAG MQB48 /49 system dealer key with IM508 + […]
Problem: Try to clone or add Vw Passat 2011 ID48 key with Autel IM508 but failed. Same message ‘UPDATE: cloned with mini key tool and […]
How to program a VW Passat 2010 all keys lost? What’s involved? 1.If with CCM module. There is MUCH easier way to do these Passat […]
Which tool to program VW Beetle 2015 all keys lost? 1.VVDI2: Failed Under key learn VVDI2 recognised the dash like Marelli with Motorola 9S12 […]
Problem: I have added keys to skoda octavia 2017 with xhorse vvdi key tool plus and car is still in learning mode. Try to reset […]
Here is the clue to program VW Jetta 2013/14 TSI ECU MED 17.5.20 to the car when old ECU got water damaged. Solution: One of […]
Most VW, Audi, Skoda, Seat cars after 2009 with VDO NEC clusters all keys lost can be done with Autel IM508/IM608/IM608 Pro via dump using APA102 clip […]
How-to: read VW Caddy Continental Simos PCR 2.1 ECU PIN, CS component security and Mac code with Autel IM608 using Gbox2 on bench. Connect ECU […]
2010 Volkswagen Passat CC how do I do the eeprom on it with Autel MaxiIM Im608/IM508? Open board, desolder 95320 chip and read chip. You cannot […]
Tutorial: how to program Audi A3 2016 new MQB key using xtool x100 pad2, pad3 or x100 elite. Key can be generated by Keydiy ZB […]
2014 VW Jetta kessy NEC 24c64 chip all keys lost is done with Autel IM608. First time I had to take cluster out. The only […]
How-to: program Audi A5 2012 remote key by obdstar x300 dp plus via OBD successfully. Procedure: Step 1: Read Immo data Step 2: Make dealer […]
VW Golf 7 2017/2018 KeylessGo add key successfully done by obdstar x300 dp plus and xhorse smart key. For MQB with blade you need original key only. […]
Audi A1 2017 VDO NEC 24C64 2014 all keys lost. Customer bought a dealer key at Audi before contacting me. I took the job even […]
Question: Audi s7 2013 bcm2 all keys lost, Autel IM508 got the cs code, generated dealer key, programmed proximity, key was written in the system, […]
Audi A3 2004 to 2013 all keys lost requires 7th byte CS code via eeprom. Here is the trick. The job can be done by Autel […]
Volkswagen Passat CC 2012 is done with Autel IM608 in Smart mode via obd. I programmed 3-4 of them with the 608. No problems, but […]
New test report: program 2018 Audi A6 – push to start key with autel maxiim im608 and xhorse smart key successfully. Successfully able to program […]
Volkswagen, Audi, Seat and Skoda series models require obtaining the CS, PIN and MAC values of the current vehicle first before immo programming. Some models […]
Xhorse vvdi key tool plus read Audi Q3 NEC24C64 id48 keyless immo data successfully, but cannot prepare dealer key. Obdstar x300 dp plus precoded the […]
Copyright © 2026 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com