JMD Handy Baby 2 Remote Key Renew Wiring Diagram
As titled, here’s remote/smart key renew wiring diagram to JMD Handy Baby II 2nd generation key copy machine. If you find the chip list is less than […]
How to Program BMW CAS3+ All Keys Lost with BMW E/F Scanner
Here’s the guide to write keys in CAS3+ in case of loss all working keys using BMW E/F scanner and BMW Explorer software. ALL keys […]
CGDI MB Program Mercedes W164 EIS Key on bench
CGDI Prog MB newbie working experience on Mercedes W164: Day 1: I bought cgdi mb but can’t connect to w164 EIS on bench – […]
What’s the benefit of reading & writing KVM data with Yanhua ACDP?
Look here: How to quickly read/write KVM data for Jaguar and Land Rover with security With ACDP mini via ICP: safe & time-saving Easy and time-saving: professional ports instead of […]
JMD Handy Baby 2 Review: Good and Promising
Just received my handy baby2. The site i used is http://www.obdii365.com/wholesale/jmd-handy-baby-ii-key-copy-machine.html It looks and feels good, but I have a few feedback about it: […]
Condor XC-Mini Key Cutter Series KM03 vs. KM02
This is for your information. It’s different between Condor XC-Mini KM02xx and KM03xx series What is the difference between KM02xx and KM03xx series ? The difference is: motherboard, […]
JMD Handy Baby II Copy Fiat 500 ID46 Remote Key
We have sucessfuly cloned a ID46 remote key to a Fiat 500 using new JMD Handy baby II key copy machine. Very easy and fast. […]
JMD Handy Baby II Unlock BMW PCF7945 Smart Key
New JMD Handy Baby II second generation key copy machine adds lots of new features, IC/ID decoding, smart key renew, copy garage door remote control […]
OBDSTAR Adds BMW 8HP, Renault Clio 4, Durango etc
OBDSTAR X300 DP/X300 DP PLUS released new software update adding more features. Check detail below: BMW BMW G-series 8HP gearbox reset via OBDII ChangeHe M70 BCM […]
Program Hyundai Sonata 2018 8A Smart Key with OBDSTAR X300 DP Plus
How to: read pin code from 8A Smart card key and add a smart key on a Hyundai Sonata 2018 using OBDSTAR X300 DP PLUS. Original […]
Original Tango V1.113 adds Toyota H 128bit and G TRUE Image generator
Original Scorpio-LK Tango transponder key programmer software update to v1.113 (28.12.2018) Tango Software v1.113 Tango software added (online update) Again FIRST in the WORLD! Copying Toyota H-key […]
How to Program Toyota Corolla Old Model 4C Chip Key via EEPROM
How to: Toyota Corolla old model pre-2004 lost key programming using UPA USB EEPROM programmer and TM100. This car has 4C chip and can be made programming 93C56 […]
CGDI Prog BMW adapts F35 N20 ECU Donor via OBD
CGDI Prog BMW adds “BMW data Modify” function which is used for adapt the ecu donor. Its simple to do. Engine Model example: BMW F35 N20 engine […]
CGDI MB Program Old Benz K-line w202 w208 w210 Key via OBD
CGDI Prog MB software v2.8.1.0 adds Mercedes Benz old K-line vehicle key programming. Here’s the guide on adding new keys to w202 w208 w210 kline MB 38pin […]
Will CGDI MB or VVDI MB Program Mercedes FBS4 keys?
What users think of CGDI Prog programmer and VVDI MB tool regarding Mercedes FBS4 key programming. Real opinions from users: User 1: the […]
Lonsdor K518 Adds Ford Fusion 2017 Smart Key Success
Ford Fusion 2017 smart key successfully programmed by Lonsdor K518ISE key programmer under New Mondeo menu. Original key (Put original key into cup holder) New smart key […]
Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering
Yanhua Mini ACDP adds VW MQB module and PCF key adapter which enables MQB key programming without soldering. Demonstrating MQB key learning on bench: Step 1: Read EEPROM & […]
CGDI MB V2.8.1.0 adds Mercedes K-line EIS All Keys Lost
CGDI Prog MB key programmer BenzMonster software release to V2.8.1.0. CGDI MB NEW (2018.12.19) 1. Adds K-line all lost collection support EIS Model w202/208/210, 203/463/639 2. […]
How to Flash Lonsdor K518ISE Key Programmer Firmware?
Problem: If you have error “Run App failed, unknown error” or “Update failed , APK Version : V1.5.17” when updating Lonsdor K518ISE, follow solution here to solve the […]
How to Solve CGDI BMW “Update FEM/BDC” Error?
Sometimes you are trying to program keys to FEM/BDC system, CGDI Prog BMW will give you error “This version FEM/BDC is not supported, pls update your FEM/BDC”. […]