How to Register and Update OBDSTAR Tools

Original OBDSTAR Tools (OBDSTAR X100 Pro,X300 Pro3 Key Master,F-100,F108,VAG-PRO etc) software can be updated online. All OBDSTAR products share the same registration and upgrade procedure. Check step-by-step below.

How to register OBDSTAR Tools?
1. Power on the OBDSTAR device
register-obdstar-tool-1

2.Go to “ABOUT” and press “ENTER”
register-obdstar-tool-2
3. Check the device information (Serial Number, register password etc)
register-obdstar-tool-3
4.How to tell original OBDSTAR Tools from clone? You can press “F1” and “F2” buttons at the same time, the device will show a secret number. Send the number to factory or authorized dealer to confirm your device is real or fake.
register-obdstar-tool-4
5.Go to OBDSTAR official website www.obdstar.com to register
Enter user information and sign in.
register-obdstar-tool-5

6. Enter product serial number & register password got from Step 4.
Enter the distributor code/dealer code software show you.

register-obdstar-tool-6
Finally, click”Next step” and type your own information.
1. First register and login official website follow above procedure.

update-obdstar-tool-1

2. Select “DownCenter” menu

update-obdstar-tool-2
3. Download the obdstar update tool

update-obdstar-tool-3

4.Upzip and install update tool
update-obdstar-tool-4

5.Select software you need to update and download in bulk

update-obdstar-tool-6
6.You need to unzip these 2 files shown is picture below:
update-obdstar-tool-7
7. Update in progress

update-obdstar-tool-8
http://obdstar.blogspot.com/2016/06/how-to-update-obdstar-x300-pro3-key.html

 

Copy Protected by Chetan's WP-Copyprotect.