Here’s the step-by-step guide on reading pin code and program smart key on Bentley Flying Spur pre-2012 with Lonsdor K518ISE key programmer by OBD.
K518ISE Supported BENTLEY Vehicle List
|Flying Spur||Other||12-||Other||Key Programming|
|Mulsanne||Other||Other||6.8 Liter||Key(Smart Key) Programming|
Step 1: Read Pin Code
Connect K518ise host with vehicle via diagnostic socket
Select Immobilization->Bentley->Flying Spur->-2012->Immobilizer->Read pin code
Turn ignition to ON position
Reading pin code…
Trying to get pin code
Lonsdor K518 read Flying Spur ECU version, PIN and CS success
Write down the pin code
Step 2: Program Key
Select Learn Key
Turn ignition switch to ON
K518ISE display vehicle part number
Lonsdor K518ISE requires to enter PIN code to access
Enter pin code just read and confirm
Insert the key and switch ignition OFF, and remove the key from the ignition lock, then insert key and switch ignition on.
Identified number of programmed keys in car: 1
Enter key number to be programmed
Here we need to program 1 key
Turn the ignition to OFF position. Insert all keys in turn and turn ignition ON for at least 5 sec. When all keys are replaced, click OK to finish key learning.
Note: If the remote control can remotely control the vehicle, but cannot start car, the dashboard prompts IMMOBILIZER ADVANCED.