How to Enable/Disable BMW F-series Key with CGDI BMW

How to: Enable/Disable BMW F-series key using CGDI Prog BMW key programmer.

 

1. CGDI BMW enables F-series key

Select BMW Enable Key
cgdi-bmw-enable-f-series-key-1
Display key information
cgdi-bmw-enable-f-series-key-2
cgdi-bmw-enable-f-series-key-3
Select key position to be enabled
cgdi-bmw-enable-f-series-key-4
Enable the key
cgdi-bmw-enable-f-series-key-5

Put the key vertically in the key induction area of the direction column
cgdi-bmw-enable-f-series-key-6
cgdi-bmw-enable-f-series-key-7
Enable the key successfully, the re-enabled remote key may not immediately take effect on the vehicle, in this case through the manual key to open the vehicle, if necessary, through the emergency start function start the vehicle. To do this, keep the master key in the mark position and manipulate the start/stop button according to the instructions. Then the ignition key should be properly functioning again.
cgdi-bmw-enable-f-series-key-8

2. CGDI BMW disables F-series key

Select BMW Disable Key
cgdi-bmw-disable-f-series-key-1
Display key information
cgdi-bmw-disable-f-series-key-2
cgdi-bmw-disable-f-series-key-3
Select key position to be disabled
cgdi-bmw-disable-f-series-key-4
Disable the key
cgdi-bmw-disable-f-series-key-5
Disable key success
cgdi-bmw-disable-f-series-key-6
http://www.obdii365.com/service/how-to-enable-and-disable-bmw-f-series-key-with-cgdi-prog-102092.html

 

Related post:

CGDI Prog BMW Key Programmer F-series Coding Manual

 

Copy Protected by Chetan's WP-Copyprotect.