Program Mini Cooper R56 2014 CAS3 Key with Autel MaxiIM IM608

Here’s the step-by-step key programming procedure for Mini Cooper 2014 Cas3 with Autel MaxiIM IM608.
Select IMMO->MINI->Auto Detect VIN-> Mini (Europe)->Smart Mode
autel-im608-mini-cooper-cas3-1
autel-im608-mini-cooper-cas3-2
IM608 will automatically scan the immobilizer system, engine system, transmission system
autel-im608-mini-cooper-cas3-3
Press OK to continue
Select Key Learning function
autel-im608-mini-cooper-cas3-4
Autel IM608 read vehicle and ecu information
autel-im608-mini-cooper-cas3-5
This is a MINI R56 CAS3
Confirm information and press OK to continue
Going to generate dealer key
Add key and all keys lost are both available for current CAS
Key learning process requires network to obtain data. Enable WiFi connection.
autel-im608-mini-cooper-cas3-6

Remove the key from the ignition switch. If it is a smart key, take the key out of the car.

autel-im608-mini-cooper-cas3-7

Reading key information
Connect to internet to obtain data
Read key information success.
Backup original key data

autel-im608-mini-cooper-cas3-8

Save key data

autel-im608-mini-cooper-cas3-9

Press OK to continue

MaxiIM IM608 will key numbers and positions, select an available key position (i.e Key4) and press Programmer Generation Key

autel-im608-mini-cooper-cas3-10

Choose key type, here Semi-smart key

autel-im608-mini-cooper-cas3-11

Connect the IM608 to the XP400 programmer and put the new key into the XP400 programmer card slot

autel-im608-mini-cooper-cas3-12

Writing key in process

autel-im608-mini-cooper-cas3-13

Generate dealer key success

Insert the key into the ignition switch to start the car once.

If the vehicle cannot be started, or the ELV is displayed on the instrument, please synchronize the ELV or DME according to the situation

autel-im608-mini-cooper-cas3-14

Program new smart key success.

autel-im608-mini-cooper-cas3-15

Done.

www.obdii365.com

 

This site is protected by wp-copyrightpro.com

error: Contact www.obdii365.com