What Tool to Program Iveco Daily 2020- All Keys Lost?

Any idea what tool to make all keys lost for Iveco Daily 2020 onwards? Avdi, smart pro or autel im608? There is no communication with bcm via OBD. Maybe they blocked the bcm through the OBD. How to program all keys lost?



Try do it by eeprom dump.

AVDI abrites will do it but not by obd but from the dump, you will need to read the bcm dump via eeprom or with abprog , then use the keymaker tool on abrites fca software to precode the key and get pin , you can then program the key to the vehicle , iveco daily after 2020 was part of the newly released functions.


“With the latest version V8.9 of the ABRITES Diagnostics for FCA vehiclesyou are now able to prepare transponders for Fiat Ducato, Iveco Daily and Fiat 500L, manufactured after 2020. You need to read the external EEPROM from the BCM module using the ABPROG Programmer, then load the file in the Transponder Maker to prepare a key. The prepared key can then be programmed via the Key Learning menu.”



The car finally started, using abrites by reading the eeprom.

The BCM in my case is Magneti Marelli,  10 to 15 minutes max to remove BCM.  The only thing this take care about the pins when you try open the plastic cover. Very fragil.

Some pointed out that it can also be done using autel im608.

This site is protected by wp-copyrightpro.com