Autel IM508 IM608 Supported BMW ISN DME List
Autel MaxiIM IM508/IM608/IM608 Pro can read BMW ISN from DME in 3 modes: via OBD, on bench and boot mode. Obdii365.com here provides a supported […]
Autel MaxiIM IM508/IM608/IM608 Pro can read BMW ISN from DME in 3 modes: via OBD, on bench and boot mode. Obdii365.com here provides a supported […]
Question: Autel im608 has programmed a new key on a 2017 BMW 330i fem system (engine code is F48) successfully. On bench with a FEM […]
Launch X431 X-PROG3 Immo key programmer supports some BMW F chassis N20/N55/S63/N63 engine ECU ISN code read and write function, used for CAS4+ all keyys […]
I’m here just inform that obdstar X300 DP plus now supports reading CAS4 working similar as BMW explorer by obd successfuly. Unlocking procedure is reflash […]
Question: Is there any tool can read ISN from EGS of BMW E or F or G chassis? Answer: Autohex II BMW. Autohex II […]
Problem: I tried to add a key to a Mini Cooper 2009 CAS3++ ISTAP with OBDSTAR X300 DP Plus. It asks to update ISTAP function. […]
Problem: I’m doing bmw Cas 3+ (0L15Y) all keys lost with Autel MaxiIM IM608. I want to program a new key on bench. this is […]
Autel MaxiIM IM608 won’t do BMW Mini with EWS3. Tried all different ways, from reading it with another tool using the eeprom data etc. But it […]
Question: Is it possible to clone a fem unit from Bmw f20 2.0 diesel? Which tool and how to clone? Solution: It’s possible, […]
CGDI Prog BMW key programmer software update to V3.2.1.0. (2021.04.28) 1. BMW EGS Change: Added 6HP(E): (1)Read EGS ISN, EGS status, Reset adaptation, Modify VIN, […]
BMW M2 2015 FEM all keys lost programmed successfully. keyless go works as well Customer had a spare working cluster so plugged in to test. […]
Problem: Has anyone tried writing a key to an EWS3 module using the autel xp400 pro? I bought the eeprom expansion pack specifically to bench […]
Yanhua Mini ACDP free update BMW CAS3/CAS3+/CAS3++ DME ISN read and write (replace DME) function on March 18, 2021. Easy way to exchange DME for […]
How to read ISN of EDC16c35 (for example in encrypted CAS3 + when all keys are lost)? An increasing number of locksmiths verified CGDI Yes, […]
AK90 is the cheapest solution for BMW EWS key programming. Today have done a BMW E36 EWS4 (add key). Firt read EWS4 2L86D dump […]
What programmer would be the best for OBD key programming for BMW E series, I have around $1000 to spend. Most locksmiths vote VVDI […]
Dear CGDI Prog BMW Programmer users: During the past days, some locksmiths feedback that when they click on “FEM /BDC key matching”, they receive a prompt […]
Although BMW EWS is a very easy job can be done by cheap AK90 at $30, it is just nice to know Autel MaxiIM can […]
Confirmed: Yanhua Mini ACDP add Module 17 for BMW E series (GS19D) 6HP refresh is the global first device to clear the BMW E series 6HP EGS ISN on bench, and read BMW […]
Problem: I have received the autohex ii bmw full version, but i cannot get it work. Saying all function services disabled and cannot initialize connection […]
Yanhua Mini ACDP key programmer is the best solution of BMW DME ISN reading & writing. It covers a wide range of BMW DME models, and […]
Question: I had this two errors when trying to read MEV9N46 DME ISN using Yanhua Mini ACDP… and now it does not wanna connect through […]
Test feedback: Xhorse VVDI Key Tool Plus is able to Generate a key via OBD for BMW CAS4. Operation steps: Put the key into the […]
Make dealer key for a BMW F10 2011 with regular CAS4. Read with VVDI PROG first and make key with CGDI BMW? or read with […]
If your Xhorse VVDI BIMTOOL PRO key programmer met issue like this : There was no connection with the car (either via CAN or KLINE […]
Copyright © 2026 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com