Autel IM608 Reset Used BMW Transmission EGS
How to reset a used BMW transmission controller and coding with Autel IM608. Only IM608 JBOX or J2534 device is connected to the OBDII port. […]
How to reset a used BMW transmission controller and coding with Autel IM608. Only IM608 JBOX or J2534 device is connected to the OBDII port. […]
Autel released Immobilizer software in October and September 2022. The upgrade can be applied to MaxilM IM508, MaxilM IM608, MaxilM IM608 PRO, OtoSys IM600. VW […]
Tutorial: Hyundai SantaFe 2019-2022 KeylessGo Smart Key programming with Autel IM608/IM508/OtoFix IM1. Go to Immobilizer->Hyundai->Manual selection->Europe-> SantaFe(TM)->2019 onwards->Smart Key Confirm vehicle information Go to […]
Can Autel G-box2 work with MaxiIM KM100 key tool? Yes, G box2 will work with KM100. But KM100 does not have Mercedes and […]
Here’s the solution to OBDSTAR X300 DP plus screen freezes boot logo flashing and non-responsive status problem. Solution: Flash the x300dp plus. Contech obdii365.com to […]
Autel is rolling new generation MaxiIM key programmers, IM608 II, IM608S II, IM608 Pro II and IM508S. What’s the difference between MaxiIM 1st and 2nd […]
I have added a new spare ID47 smart key to 2022 Hyundai Tucson with Autel IM508 successfully. Key ordered from Korea. Autel im508 read pincode […]
Problem: I bought a new Autel KM100 key programmer to add new key to Hyundai Santa Fe 2019. Generated autel universal key, Added fine, remote […]
Does Autel IM608 have the ability to do online scn coding/programming for Mercedes and online programming for BMW ? IM608 diagnostic function is the same […]
Here comes the solution to Autel IM508/IM608 “Authorization check failed Error Code 9” problem. Common solution: Delete specific car software and download again. Path: data […]
Problem: My Autel IM508 doesn’t open. It stayed in the socket for a few hours. Solution to IM508/IM608 no turn on problem: 1.Connect the power […]
We have listed Autel MaxiIM IM608/IM608 Pro/IM508 XP400 subscription workable car brands and function before. Autel IM608 1 Year Subscription Car and Function List But […]
Problem: My obdstar x300 dp plus software subscription is expired, I want to renew it on tablet. But it says 1004: Insufficient Token Balance. Any […]
Autel MaxiIM series KM100, IM508, IM608, IM608 Pro global versions don’t have Indian, Australian, Brazilian, and Malaysian car brands. How to add these brands to […]
Opel agila 2009 blade key all keys lost is done by obdstar x300 dp plus. Dealer key Use Suzuki Splash 2005-2009 Read pin code All […]
Question: How do you get your immo bin files in and out of your Xtool x100 Pad3? Are there some kind of PC software that […]
Dead Autel km100 solution. If the battery is fully discharged and cannot be charged and turned on anymore, open km100, disconnect battery and attach power […]
Launch X431 V/PAD has the wiring diagram to a part that’s not included with the xprog3. Where can i get the adapter for xprog3 mcu3? […]
I have encountered real trouble many times but I haven’t found proper information online. I did today a key for a Kia Forte 2018. It […]
Q: I need to program Iveco Daily 2008 all keys lost with autel im608 pro. Eeprom read ok. Make dealer key ok. Key programming failed. […]
Did anyone ever resolve issue with obdstar p001 adapter lighting up pink? Solution: 1). Plug in the power adapter 2). Reset the x300 dp plus […]
Q: I bought an Autel KM100 I’m trying to generate a chip I tested it with a xhorse vvdi super chip xt27a but it doesn’t […]
Today did a 2010 Toyota Highlander Hybrid US model all keys lost, push to start with Autel IM608. It is time to try xhorse XM38 […]
Question: the lonsdor 0440b keys have a frequency of 312MHz, does it work for European cars? Anwer: Yes, you can switch frequency to 312mhz with […]
Problem: I have an Autel IM508 and i have this message in the photo and the tool restarts sometimes itself, has anyone else encourage this […]
Copyright © 2026 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com