Program Honda Civic 48 Chip Key with OBDSTAR X300 PRO3

Honda Civic 2004 chip48 generate remote with kd-900 and program chip by OBDSTAR X300 PRO3 key programmer, Good luck!


Part 1. Generate remote with KD900 remote maker

Part 2. Program chip 48 with OBDSTAR X300 PRO3 Key master


How to generate remote with KD900 remote generator?

Customer lost all remotes

Generate remote-> OUCG8D345HA


Connect circuit to cable and choose “Make Remote”



Then put the circuit into key shell and insert chip 48 in keyshell


How to register remote to car?

Insert the key and turn ON->press LOCK release-> then turn OFF 3 times until hear door cycle. Car afterthat press LOCK 1 time


How to program chip48 with OBDSTAR Key Master?

Use programmed key turn ignition on

Choose HONDA -> IMMOBILIZER -> AUTO -> 16PIN, press ENT to continue





Turn on ignition and press ENT

Initializing communication…

Is checking ** mode, please wait…

Determine the type of immobilizer system, please wait…

This car is 3rd generation, press ENT



Choose Key -> ADD A KEY



Initializing communication…

– switch ignition off and turn on ignition with original key

– turn off ignition with within 15 seconds

– turn on ignition with a new key within 20 seconds

– turn off ignition

– turn on ignition switch without changing the key within 20 seconds

– switch ignition off

– turn on ignition

OBDSTAR X300 PRO3 will ask you if the immobilizer device indicator is off?

The indicator should be off now, press ENT and switch ignition off

Turn on ignition with original key

The key registration has been completed! Turn off ignition


Test the new key

Done! The security light go off when insert the new key!

Copy Protected by Chetan's WP-Copyprotect.