FEM test platform: How to add a FEM key with VVDI2 or CGDI
Do I need a FEM test platform to do FEM keys using VVDI2? The answer can be “yes or no”. That is, you can program a fem […]
April 2019
Auro IM600 Autel IM608 Big Update for Chip and IMMO (2019-04-22)
Auro OtoSys IM600/ Autel MaxiIM IM608 released BIG update for IMMO! 500 EEPROM Chips added and 500 MCU chips added! V2.01 4/22/2019 IMM0_lmmo Progrann Version number V2. […]
How to Program a used ELV on Mercedes W246 FBS3?
Problem: Did anyone successfully programmed a used ELV on a Mercedes W246 2014 , its still FBS3. Emulator works no problem, but i cannot activate […]
OBDSTAR X300 DP PLUS adds Chrysler 300C Dodge RAM 2009-2012
OBDSTAR X300 DP PLUS update Chrysler IMMO Software to V31.01 on April 24th, 2019. Update Feature: Adds Chrysler 300C 2009-2012 Pin Code reading […]
OBDSTAR X300 Pro3 Works Good on Asian Models Nissan Toyota etc
Obdstar X300 Pro3, Good economy key programmer. Asian models are pretty good but you need to know what you’re doing to use it. . . […]
Yanhua Mini ACDP Adds N13 563TU N63TU MSV70 MSS60 DME ISN Read/Write
Yanhua Mini ACDP released new upgrade on April 18th, 2019. New update: Read/write ISN from new added DME models Read/Write N55 DME ISN (E […]
Can I Add Another Software to Xtool X100 Pad2?
Question: Has anyone added another software to the Xtool x100 pad2 auto key programmer? Answer: Some Xtool Pad2 users has tested and confirmed working. […]
CGDI BMW Program CAS3 CAS4 All Key Lost No need DME ISN
Why CGDI Prog BMW is one of the must-to-have BMW Devices ? No need DME ISN or Removing ISN when All Key Lost. Note: […]
Auro OtoSys IM600 Adds Fiat Pre-code Beta Testing
Good news!!! Auro OtoSys IM600 and Autel MaxiIM IM608 adds Fiat pre-code beta testing software version on April 12th, 2019. IMMO Fiat V2.48.13 12/04/2019 1. […]
Yanhua Mini ACDP Adds Key on Rolls-Royce Ghost CAS4 Success
New test report: Yanhua MINI ACDP added a new key on a Rolls-Royce Ghost CAS4 system. No need to remove chip No need to cut […]
JMD Handy Baby II Key Copy Software Update to V2.34
JMD Handy baby II key copy machine software released to V2.34 on April 10th, 2019. Handy Baby 2 V2.34 Update Features: Optimize IC/ID card […]
2006 Nissan Altima: How to Cut keys and Program remotes
This is how to decode & cut a key and program or add a new key to Nissan Altima year 2006. If you have […]
Tango V1.114 adds SLK-06 Emulator for Toyota H Immobilizer All Keys Lost
Original Scorpio Tango transponder key programmer software released to V1.114. This version adds SLK-06 emulator for Toyota H immo all keys lost. Tango Software […]
Program Hyundai i20 Smart Key with VVDI & Xtool X100 Pad2
How-to: generate and program Hyundai i20 smart key with VVDI Mini Key Tool and Xtool X100 Pad2. Step 1: Generate remote with VVDI Mini […]
Fiat Ducato 2007 Read Pin, Add Dealer Key and Program Remote
How to: reed eeprom/pin, make and add dealer key and program remote control to a Fiat Ducato 2007 Marelli 70F3237+ 95160 (ID48). Read EEPROM […]
BMW Explorer enables BMW E/F/G series immobilizer & dashboard functions
Confirmed! BMW Explorer 18.12.03 is able to program new keys and do odometer correction for BMW E, F, G series with CAS, EWS or FEM/BDC. All can be done using V2018 BMW […]
How to Program VOLVO XC60 2014 Spare Key with Lonsdor K518ISE?
New customer feedback: VOLVO XC60 2014 Spare Key (semi-smart key) well done with Lonsdor K518S key programmer. Q: How long does it require? A: Takes less than […]
How to Read and Replace Benz W169 EIS with CG Pro?
Model: Mercedes Benz B200 Chassis: W169 Year: 2010 Module: EIS Number: 1699051500 Chip: 9S12DT128-1L59W Device to read and replace: CG Pro 9S12 Programmer Procedure: […]
Autel IM608 IM600 “Function available on a pay-per-use basis ” Solution
Question: Just found this in advance mode after new update. When try to program VW 4th immobilizer all keys lost, Auro otosys im600 gives error […]
How to do Toyota Key Cutting, Decoding, Programming?
Look here: all about Toyota key cutting, decoding, programming Part 1: Toyota key decoding Part 2: Toyota key cutting Part 3: Toyota key programming […]
How to Add Land rover KVM XEP100 Key with CG Pro?
CG Pro 9S12 programmer adds Jaguar/Land rover KVM key programming (no need other devices) in previous software upgrade. Here’s a demo guide on adding a new […]