Key Pro M8

The Key Pro M8 (MVP Pro) is the most powerful automotive Key programmer locksmith tool up to now.

Key Pro M8 guides you through various processes for key programming & remote key fob programming, from the more basic keys to proximity and smart keys across all makes of vehicles worldwide on one programmer. Most vehicle immobiliser systems require security access (Pin Code) to allow keys & remotes to be programmed.The Key Pro M8 Key programmer reads many Pin Codes, providing a high quality, cost effective and valuable service for drivers has never been easier.
Standard version: V11.13 Beta version: V11.17

All available software is FREE.

Download links         1. V11.17 Update file          2. Get New Nissan Pin Code

With a free MD103 security calculator and 800 tokens

Supports worldwide car models until 2013.

key-pro-m8-auto-key-programmer-software

M8 Key Pro Function:

  1. All Makes Coverage
Abarth Acura Alfa Romeo Audi Bently Benz Chrysler Citroen Dacia Daihatsu
Daweoo Dodge Fiat Ford GM Holden Honda Hyundai Jaguar Infiniti
Isuzu Kia Lancia Land rover Lexus Lincoln Iveco Mazda MG Mitsubishi
Nissan Opel Peugeot Perodua Porsche Proton Renault Rover Saab Skoda
Smart Ssangyong Subaru Suzuki Toyota Vauxhall VW
  1. Provide Roadside Programming For Drivers
  2. Read & Clear Fault Codes
    4. Clear Key Memory
  3. Program Keys
  4. Program Proximity / Smart Keys
  5. Program Remote / Plip Keys
  6. Program Aftermarket & OEM Keys
  7. Program Aftermarket & OEM Remote Key Fob’s
    10. Read Immobiliser Pin Codes
  8. Read Pre-Code Data
  9. Display Live Data
  10. Component Actuation
  11. ECU Identification

 

Some of the functions are manufacturer / model dependent.

 

Key Pro M8 Modern Cards Support Car List

Key Pro M8 support VW vehicle list

Update Key Pro M8 token instruction

How to choose the key pro M8 M8 Key Programmer Dongle?
Easily and conveniently to get the service:

There are 800 tokens inside the Key Pro M8. When you runs out all the tokens, you can directly buy more tokens and download them via internet,which allows an affordable key programming service to be provided by professional auto-locksmiths and auto-technicians for drivers on the roadside, at home or the office.

 

Easily to program keys and remotes:

The use of transponders in vehicle keys means that whenever additional / replacement keys or remotes are required, they must be programmed into the vehicle using specialist diagnostic equipment. Originally, if  you need additional keys or remotes, you  would have no choice but to go to the franchised dealer, which could be expensive and inconvenient.

 

Advanced Technology

Designed with simplicity in mind, the The Key Pro M8 Auto Key Programmer guides you through various processes for key programming & remote key fob programming, from the more basic keys to proximity and smart keys across all makes of vehicles worldwide, on one programmer. Most vehicle immobiliser systems require security access (Pin Code) to allow keys & remotes to be programmed.The Key Pro M8 Auto Key Programmer reads a lot of Pin Codes, providing a high quality, cost effective and valuable service for drivers .

 

Innovative Roadside Key Programming:

If you are new to the industry or simply looking for a cost effective way to offer a key programming service to your customers, then the The Key Pro M8 Auto Key Programmer provides the solution. The portable The Key Pro M8 Auto Key Programmer is the ideal programming tool that programs keys and remotes for all makes of vehicles worldwide – on a ‘Pay As You Go’ basis.
The Key Pro M8 Auto Key Programmer offers the same coverage /functionality as the world leading AD100Pro, but at a fraction of the cost. Using digital tokens, which are deducted when keys are programmed, makes The Key Pro M8 Auto Key Programmer unique.
When all the tokens are used, you simply buy more tokens and download them via the internet. This allows an affordable key programming service to be provided by professional auto-locksmiths and auto-technicians for drivers on the roadside, at home or the office.
The use of transponders in vehicle keys means that whenever additional / replacement keys or remotes are required, they must be programmed into the vehicle using specialist diagnostic equipment. Originally, if a customer needed additional keys or remotes, they would have no option but to go to the franchised dealer, which could be expensive and inconvenient.

 

The Key M8 Key Programmer Technical Features:

– Electronic Tokens Downloaded From The Web(need pay for it)

– Standard & Beta (Test) Software Available

– 320 X 240 Dot Matrix LCD Touch Screen

– Connection to Vehicle Via OBD Socket

– 12v Power From Vehicle / Mains

– User ID Password Protection

– Internet Software Updates

– Multi System Protocols

– Future Proof Design

– Adjustable Contrast

– CAN Bus Interface

– USB PC Interface

– Splash Proof

– Backlit LCD

key-pro-m8-key-programmer

This blank space is kept for developing new dongle,so no dongle in it now.

Notice:

  1. Software has to be installed on XP system.
  2. DO uninstall or close anti-virus software on your laptop.
  3. DON’T Disassemble the multiplexer, which will prevent KEY PRO MB from warranty.
  4. New version solve the problem that some Toyota car needs license when programming. It can be operated directly. We will realease more and newer software for the Key Pro.
  5. Not all car models’ key programming needs tokens, the screen will promt how many tokens are needed if tokens are needed. It usually takes one token.
  6. M8 cannot get some cars’ pin code itself, you need to buyVPC-100 Pin Code Calculatorto get the code.
  7. M8 cannot program some Lexus cars that keys are 4C chip.

 

How to unlock Key Pro M8 Auto Key Programmer if it is locked?

  1. Tell us the serial number, password and ID of the device, then we will send you the unlock code.

the-key-pro-m8-unlock-way-1

2.  After you input the unlock code, your device is unlocked now, the open password is the just the original password.

3.Copy the file in the CD to the computer.

4.Connect the device to the power supply, and then turn on the device, connect the device to the computer via usb, install the driver well.

5.Run M8 Tool.exe, download the software you need to the device.

the-key-pro-m8-unlock-way-2

 

How to install Key Pro M8 driver?

Use USB cable to connect the key pro m8 main unit with your laptop.
There are two cables need to connect in total. After connect ready, power
on the machine. Then your laptop will prompt message “Found New
Hardware Wizard”

the-key-pro-m8-driver-300x225

the-key-pro-m8-driver-1-300x223

Right click “My computer” and choose “Message” option. You will enter “Computer?Management”

the-key-pro-m8-driver-2-273x300

click “The key pro”

the-key-pro-m8-driver-3-300x215

the-key-pro-m8-driver-4-300x232

Check the driver installation

the-key-pro-m8-driver-5-300x228

After click “OK” button, then go on to click “Next” option.

the-key-pro-m8-driver-6-300x231

the-key-pro-m8-driver-7-300x227

Driver is installed ready now.

 

How to recharge tokens for Key Pro M8 key programmer?

Steps:

1. After you place order on our website, please also leave us the serial number and password of the key Pro M8. We will ask our engineer to recharge it online in one day.

2. Connect M8 Pro to your computer by USB Cable and make sure your computer is connected to internet. Then update and recharge tokens. Please make sure the internet signal is good and stable.

3. Start the M8 Pro. When you start it, your computer will prompts you “find new hardware”. Please click “Install from a list or specific location (Advanced)”, and then click “Next”.

4. Please tick off “Search for the best driver in these locations” and “Include this location in the search”, and then click “Browse” to choose a installation location. Choose the driver location “browse for Folder” then choose Desktop-“The key pro (M8) driver-OK”.

5. When install driver please choose “continue anway] until you finish installing the driver.

6. After device connected to computer, please start “M8 Tool.exe” (this software we will send you online or you can find it in the M8 cd), input serial number and machine start password, and input the token number you bought (50, 100 or 250). Then click [Update].

7. Wait until update finish. Please do not disconnect from internet or power when updating. If you encounter any error, please contact us.

 

Video operation:

How to program Ford Focus 2013 key with Key Pro M8

How to use Key Pro M8 program key for Hyundai sonata 2011

 

FAQ:

Q: When i get this pro m8, do i need register first? or update it? or buy tokens?
A: NO. You can directly use it to program keys. It has 100 tokens itself. Software is installed and updated to the latest version.

Q: For this tokens, everytime i make the key, it will cost the tokens?
A: No. For ordinary models, usually does not need tokens. Only special model needs tokens. For 100 tokens in the machine, you can use it for a very long time.

Q: After the tokens is run out, i need to buy the tokens again, i buy it one by one or?
A: For tokens, we have three types to choose:
50 tokens
100 tokens
250 tokens

Q: What will i do when i buy the tokens, just pay the money for you? Else?
A: Please give us the serial number and password of your machine. We will directly open the tokens for you. Then you can directly buy it online.

Q: Can i use it to work on the latest 2012 and 2013 models?
A: Yes.

Q: Can i get the out code?
A: Out-code is only for Ford series. Dodge cannot display. Because Dodge is belongs to Chrysler vehicles. It can directly read out the password by The key pro m8. Go to pin code menu, and choose the option to read the pin code.

 

Q: When I installing driver for the keyprom8, it shows “windows encounter a problem installing the driver “, what i should do?
A: Please make sure you are using windows xp system computer to install the driver, and please follow our video to finish the driver installing.

Q: When I start the machine, it tell me ” version too old, please update”, shall I update it?
A: Yes, you need update your machine if it remind you version too old. Please give us your serial number, we will send you update file and update video, please follow our video to update.

Q: I can not start my machine when I connect by OBD2 cable, what I should do?
A: Please also connect one dongle when start machine, but please do not use Dongle B, this one can not start the device.

 

Related Item:

Key Pro M8+VPC-100 Pincode calculator

Key Pro M8+Nissan NSPC001 Pin code reader

Key Pro M8 50 tokens

Key Pro M8 100 tokens

Key Pro M8 250 tokens

 

Related Post:
Key Pro M8 another locksmith review

The key pro m8 failed to power up

The key pro m8 review by a senior locksmith

Will Key Pro M8 do Toyota/Lexus 2015 smart keys

SKP900 key programmer vs. Key Pro M8

How to set up Key Pro M8 programmer driver

The key pro m8 what worked and do not work

Copy Protected by Chetan's WP-Copyprotect.