Here’s the step-by-step installation and update guide of original Scorpio-LK Tango key programmersoftware. Operating system: WinVista, WinXP, Win7, Win8, Win10 *Tango Driver V4 WinVista, Win7 […]
How-to: program Mazda 6 year 2017 ID49 smart key by Autel MaxiIM IM508/IM608 when all keys lost via OBD. At least 2 keys are required. […]
Problem: My client asked to add a new key to his Nissan qashqai 2015. I followed the OBDSTAR X300 DP Plus operation, everything is OK. […]
Question: It has been very long time since I programmed Fiat Gande Punto all keys lost, usually for remote key you need to pre-code the […]
Xtool tech programmers (xtool x100 pad2, x100 pad3, autopropad, ps90 etc) updated GM security password reading models after 2018 in July 2020. GM Key […]
Here’s the engineer solution to CG pro 9s12 programmer can not detect the key chip and shows error “No found key”. 1, First remove the […]
How-to: add a spare Dodge Charger (2011-) proximity smart key with xtool x100 pad3 in less than 5 minutes including pull pin code. Connect xtool […]
The Xtool KC501 chip and key programmer adds Mercedes Benz Infrared key function list on July 30th, 2020. Supports following Mercedes IR key programming: […]
Question: Hi all, I have a 2011 Alfa Romeo Giulietta car to do,. You reckon the xtool x100 pad2 can handle and pull the PIN […]
Device: CGDI Prog BMW key programmer Function: BMW Data repair Explanation: Supports modifying ISN, VIN and frequency in the CAS data Supports modifying the ISN, VIN in ECU […]
Question: Who can tell me what is the difference between this two tools xtool ks-01 emulator and vvdi toyota 8a adapter, I don’t understand the […]
Xtool KC501 Key & Chip programmer, working together with Xtool tablets, is an upgrade version of KC100 IMMO adapter. The following parts are about their […]
Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first. Device […]
Compared with the similar IMMO key programming and mileage programmers, Yanhua Mini acdp operation is much more user-friendly, therefore it also meet the needs of […]
How-to: program Audi Q5 5th generation immobilizer key using Xtool X100 PAD2 via OBD. Both add key and all keys lost are available. Here’s the […]
One Customer’s 2014 bmw 428i with Fem module lost keys, I’m using Autel MaxiIM IM608 key programmer, I got the Fem module unlock and made key. The only […]
Test feedback: GMC 2017 Denali. 4-digit PIN Code reading and smart key programming on OBDSTAR X300 DP PLUS. Generate remote with xhorse remote and remote […]
One of the main reasons I bought the OBDSTAR X300 DP plus (C package) was to do the Opel 2011 Insignia BCM clone the same […]
Question: Is there a page or does someone have a list where all bmw models with the corresponding ews/cas type are listed? Answer: Yes, […]
Here’s the easy tips on how to restore BMW EWS system. 1 take another Ews and write in yours. 2 restore to factory settings […]
How-to: program remote key for Renault Sendero 2018 using Autel MaxiIM IM608 via OBD. Network connection is required. Select IMMO->Renault->Manual Selection-> Dacia Logan->2016 up->Keyless […]
Q: BMW E60 520D 2008 (CAS3) plate can some tell me if I can clone a full remote with Vvdi key tool max? What remote […]
How-to: Renault Duster 2018 remote key programming with Autel MaxiIM IM608 via OBD. 2 buttons remote key Require network connection. Procedure: Turn on ignition […]
Question: when I used yanhua mini acdp main and the extra fem bdc module to add new key on a BMW 2014 F15, I got error message ” FEM/BDC […]
Question: How I can copy the ID48 glass transponder without support by internet ? or Which is the tool I can use to clone multiple […]
Copyright © 2025 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com
