VAG Kessy PQ35 “No Basic Setting” Error Solution
When you replace a used Kessy PQ35, module ( access and start authorization ), we will be given an error code “No basic setting”. And […]
When you replace a used Kessy PQ35, module ( access and start authorization ), we will be given an error code “No basic setting”. And […]
Tips to add a spare key for Polestar 2 electric car. Usually we do those cars mainly with Vida, but today we tested Autel, and […]
Search tool for add key on Renault Master 2021+ and vans based on Master 2020+ chassis. With 5 different programmers, I wasn’t able to do […]
Problem: Autel XP400 Pro failed to communicate. The red indicator stays on. How to fix it? If the red light indicator stays on, it can […]
The EDC16CP35 is a common Bosch ECU found in many BMW diesel vehicles. Extracting its ISN (Immobilizer Security Number) is essential for key programming, ECU […]
Yanhua Mini ACDP has just released Module 38, a game-changer for BMW G-Series BDC2 immobilizer key programming! This update makes adding keys faster, safer, and fully automated. What’s the vehicle list? […]
How to progam BMW F34 2014 FEM All Keys Lost using Yanhua Mini ACDP? Step 1: Read ISN code from ECU ECU type: […]
Problem: Has anyone had any success with autel and communicating with cas3 using godiag cas3 platform? Works with vvdi key tool plus but can’t get […]
Jeep Wrangler 2023 all keys lost its possible? What tool will do? Adapters required: Gateway 12+8 adapter (any manufacturer) Autel IM508/IM608: Yes (50%) Autel […]
Problem: Tried to program new keys using Launch X431 IMMO Plus but failed. The device works fine in all procedures, but if it is not […]
Problem: Ford Fiesta 2009, all keys lost, security access fail when I’m trying to add keys. Both Xhorse and OTOFIX IM2 (same as Autel IM608) […]
Launch X431 released new BMW Immobilizer software V10.40. BMW_IMMO V10.40 Added the key adding function for the BDC02 anti-theft system under the chassis F/G of the following […]
Problem: The Launch X-prog3 PC adapter is not working at the moment. It was bound to a Windows PC, but the PC is damaged. Change to […]
How to Add Suzuki Vitara 2016 Smart Key with Autel KM100? Car Make: Suzuki Car Model: Vitara Year of manufacture: 2016 Chip type: ID47 1. […]
In this guide, we’ll walk through the OBDSTAR G3 process for proximity key programming on a 2018 VW Tiguan MQB48 5A model, covering data extraction, decryption, […]
Question: Adding a spare smart key to Fiat Talento 2021. Which device is better Lonsdor K518 Pro or SmartPro. Lonsdor K518 pro comes up with […]
Car Brand: Hyundai Model Car: Santa Fe Year of manufacture: 2022 Tool used: Autel KM100 Original key New key to be programmed (Use an OEM […]
Problem: After the most recent update, the CGDI K2 key tool device only boots up to the startup screen and then freezes, becoming unresponsive. The device has […]
Question: How to connect Autel IM508S or IM608 II with digital camera? To use MaxiIM digital camera function, you also need MV105s or MV108s […]
Question: Will Yanhua Mini ACDP2 read ISN code from BMW R chassis N16 DME? Yes, with module 3. Go to DME ISN function. Select […]
Programming a new key for a 2017 Land Rover Discovery can be done efficiently using tools like the Autel IM508, XP400, and Autel iKey. This […]
Problem: failed during make add key BMW X2 with Autel IM508S and Godiag BDC/FEM test platform module. usually does not have a problem before. but […]
CGDI K2 VAG ID48 96bit transponder cloning function is ready on April, 21st, 2025. No tokens/points required. Here we will show to copy ID48 96bit […]
As titled, can Autel AT100 super chip be reset and reused? and how to reset at100? Unlike the Xhorse VVDI super chip XT27A, which allows […]
The OBDStar X300 Classic G3 programmer has unveiled a groundbreaking new feature: MQB All Keys Lost (AKL) Sync Data Calculation, eliminating the need for third-party […]
Copyright © 2025 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com