Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Vehicle Model: Mitsubishi MIRAGE G4 2015

Key type: smart key ID46 (Hitag2)

MIRAGE G4 2015

Problem:

ENGINE WON’T CRANK
ENGINE WON’T START

Autel Im608 MIRAGE G4 1

Autel Im608 MIRAGE G4 2

Solution:

Programming immobilizer system, two Smart keys

 

Tool to program: Autel MaxiIM IM608 and XP400

Autel Im608 MIRAGE G4 Add Key 0

Procedure:

Autel Im608 MIRAGE G4 Add Key 1

Select Immobilizer remote control learning-> Smart key learning function
At least one learned smart card is required.
Close all the doors and do not lock. Unplug all external devices on the cigarette lighter to prevent interference and voltage shortage.

Autel Im608 MIRAGE G4 Add Key 2
Autel Im608 MIRAGE G4 Add Key 2

Insert a learned smart card into the key card slot.
The key card slot is near the bottom of the steering wheel, opt in the co-pilot storage compartment, if there is no card slot, close the key to the start button.
Turn the ignition on.
Turn the ignition off
Establishing vehicle communication

Autel Im608 MIRAGE G4 Add Key 3

There is a problem with the key which was used for security info, check

Press Start button, car won’t start.

Autel Im608 MIRAGE G4 Add Key 5

Insert smart key into card slot, long press the Start button.

Start car successfully.

Autel Im608 MIRAGE G4 Add Key 6

Done.

www.obdii365.com

This site is protected by wp-copyrightpro.com

error: Contact www.obdii365.com