Autel IM608Pro Add Nissan Qashqai 2015 Xhorse Key
Nissan Qashqai 2015 Add a key with xhorse mqb proximity key. Had the bcm that is listed on the naughty list. These bcm numbers are […]
Nissan Qashqai 2015 Add a key with xhorse mqb proximity key. Had the bcm that is listed on the naughty list. These bcm numbers are […]
Question: I bought these OBDSTAR Toyota 24 & 27 pin connectors to read smart boxes. But they have a 16 pin obd2 connector on the […]
Question: where to get drivers to use Autel IM608 MaxiFlash JVCI as passthru J2534? Answer: Just download the autel PCsuite and it’s in there. Download […]
What is a better tool to add key to VW MK5 year 2005 Visteon dashboard? Autel IM508 or FVDI clone? Autel: Need luck. Some […]
OBDSTAR released new Hyundai Kia immobilizer software adding latest models till 2023. This update can be applied to x300 dp plus and x300 pro4. […]
Successfully programmed 2013 Kia Carnival (the Australian market) key using Autel MaxiIM KM100. Programming Path: Kia/Manual selection/Europe/Sedona 2006-15 Immo Status Scan (key ON) Read Pin […]
Is there any difference between launch x431 immo elite and Autel IM508? Launch x431 immo elite and autel IM508 are all powerful combinations of key […]
Information on the new OBDSTAR CAN Direct kit Toyota immo system smart box data reading cables. There are 2 different cables Toyota 24 and Toyota 27 cables. The […]
Another success of Autel MaxiIM KM100 from Australian market. Holden VF series I keyed ignition. Auto vin detects – says no compatible software. Pathway Chevrolet/USA/Cruze/2016-18 […]
Problem: 1). I cannot read the 2018 jeep grand Cherokee pin code with Autel IM608. 12+8 FCA gateway bypass cable is connected. 2). Then I […]
OBDSTAR released new GM IMMO software V33.54. Adding the following new GM models: Cadillac Escalade 2021-2022 proximity (with CAN FD Adapter) Chevrolet Bolt EV 2022 […]
Here comes the problem: An Autel MaxiIM IM608 user was doing a 2017 Kajar im608 spare key job. Start procedure to read pin but failed. He has […]
Question: Is it possible to program xhorse audi 754j smart key with Autel MaxiIM IM508/IM608? Answer: Yes, it can, the key cannot be cloned, you […]
Problem: The Autel MaxiIM IM608 PRO gave an error when I was programming for Honda or Acura. But other models can work well. It says: […]
CGDI Prog BMW, Yanhua Mini ACDP and VVDI BIMTool pro which one do you recommend for BMW Locksmith & Engineer? Here is the clue. […]
Question: I need a Yanhua Mini ACDP pinout for BMW CAS 2 module without interface board. I don’t have the interface board, where can i get […]
Here is the Autel XP400 Pro programmer self test guide. Normal situation Steps: 1. While in the main menu screen, connect the programmer. 2. […]
We’re going to demonstrate how to use the immobilizer data processing function using the Autel MaxiIM KM100 key tool. First you need to load immobilizer […]
2021 LEXUS ES300 8A proximity all keys lost is done by Xhorse and Autel IM508. 20 min done. No need for 12 digit pin and […]
Question: What is the exact procedure for programming keys for Mercedes ML W163 with AAM module using FVDI tool or the SVCI? Procedure: 1.Turn […]
If you are generating 902 mhz for ford you have to use the right fobs. If you are trying to prevent the future purchase of […]
CG007 Godzilla automotive key cutting machine supports free udpate online. It needs to make a calibration after update, check the step-by-step guide below. Update and calibration steps: […]
I was able to successfully program a combo remote and flip key fob to work on my 2015 Toyota Tacoma. It unlocks, locks, and starts! […]
Problem: Just did and add key on a 2022 Toyota Camry push to start with Autel IM608 pro and the keys start the car but […]
Question: is there a way to tell/determine if the gearbox is a cxx, exx, fxx or mqb version DQ250? Every gearbox can have any type […]
Copyright © 2025 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com