Program BMW CAS3+ Key with Autel XP400 and VVDI2
Autel XP400 chip programmer can easily do the chip read and write, key read and write on PC. Here’s the demo example on reading CAS3+ […]
Autel XP400 chip programmer can easily do the chip read and write, key read and write on PC. Here’s the demo example on reading CAS3+ […]
Here’s the step-by-step installation and update guide of original Scorpio-LK Tango key programmersoftware. Operating system: WinVista, WinXP, Win7, Win8, Win10 *Tango Driver V4 WinVista, Win7 […]
How-to: program Mazda 6 year 2017 ID49 smart key by Autel MaxiIM IM508/IM608 when all keys lost via OBD. At least 2 keys are required. […]
Problem: My client asked to add a new key to his Nissan qashqai 2015. I followed the OBDSTAR X300 DP Plus operation, everything is OK. […]
Question: It has been very long time since I programmed Fiat Gande Punto all keys lost, usually for remote key you need to pre-code the […]
Xtool tech programmers (xtool x100 pad2, x100 pad3, autopropad, ps90 etc) updated GM security password reading models after 2018 in July 2020. GM Key […]
Here’s the engineer solution to CG pro 9s12 programmer can not detect the key chip and shows error “No found key”. 1, First remove the […]
How-to: add a spare Dodge Charger (2011-) proximity smart key with xtool x100 pad3 in less than 5 minutes including pull pin code. Connect xtool […]
The Xtool KC501 chip and key programmer adds Mercedes Benz Infrared key function list on July 30th, 2020. Supports following Mercedes IR key programming: […]
Question: Hi all, I have a 2011 Alfa Romeo Giulietta car to do,. You reckon the xtool x100 pad2 can handle and pull the PIN […]
Device: CGDI Prog BMW key programmer Function: BMW Data repair Explanation: Supports modifying ISN, VIN and frequency in the CAS data Supports modifying the ISN, VIN in ECU […]
Question: Who can tell me what is the difference between this two tools xtool ks-01 emulator and vvdi toyota 8a adapter, I don’t understand the […]
Xtool KC501 Key & Chip programmer, working together with Xtool tablets, is an upgrade version of KC100 IMMO adapter. The following parts are about their […]
Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first. Device […]
Compared with the similar IMMO key programming and mileage programmers, Yanhua Mini acdp operation is much more user-friendly, therefore it also meet the needs of […]
How-to: program Audi Q5 5th generation immobilizer key using Xtool X100 PAD2 via OBD. Both add key and all keys lost are available. Here’s the […]
One Customer’s 2014 bmw 428i with Fem module lost keys, I’m using Autel MaxiIM IM608 key programmer, I got the Fem module unlock and made key. The only […]
Test feedback: GMC 2017 Denali. 4-digit PIN Code reading and smart key programming on OBDSTAR X300 DP PLUS. Generate remote with xhorse remote and remote […]
One of the main reasons I bought the OBDSTAR X300 DP plus (C package) was to do the Opel 2011 Insignia BCM clone the same […]
Question: Is there a page or does someone have a list where all bmw models with the corresponding ews/cas type are listed? Answer: Yes, […]
Here’s the easy tips on how to restore BMW EWS system. 1 take another Ews and write in yours. 2 restore to factory settings […]
How-to: program remote key for Renault Sendero 2018 using Autel MaxiIM IM608 via OBD. Network connection is required. Select IMMO->Renault->Manual Selection-> Dacia Logan->2016 up->Keyless […]
Q: BMW E60 520D 2008 (CAS3) plate can some tell me if I can clone a full remote with Vvdi key tool max? What remote […]
How-to: Renault Duster 2018 remote key programming with Autel MaxiIM IM608 via OBD. 2 buttons remote key Require network connection. Procedure: Turn on ignition […]
Question: when I used yanhua mini acdp main and the extra fem bdc module to add new key on a BMW 2014 F15, I got error message ” FEM/BDC […]
Copyright © 2026 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com