Autel IM508 IM608 Optimize Process for BMW CAS4 OBD No More Brick!
Autel MaxiIM IM508, IM608 and IM608 Pro released new BMW Mini Immo software version on Jan. 14th, 2023. IMMO BMW 1. Optimize process for key learning via […]
BMW key programmer
Autel XP400Pro BMW EWS3 “Programmer Not Connected” Solution
Problem: I need to program EWS3 key with Autel IM508 and XP400 Pro. There is no way to do ews3. I have done everything but […]
Yanhua Mini ACDP Read BMW F30 N20 DME ISN
Question: What is the procedure to read BMW F30 FEM DME ISN using Yanhua Mini ACDP? Solution: Run ACDP Mini App Follow procedure below to […]
Yanhua Mini ACDP Reset BMW FEM/BDC Mileage without Soldering
You are able to reset BMW FEM/BDC mileage with VVDI2/VVDI BIMTool, CGDI, and Yanhua Mini ACDP. ACDP Mini is easier comparing CGDI and VVDI. Here is […]
Yanhua Mini ACDP Repair Dead BMW CAS3+ ISTAP?
Problem: I have done a BMW E60 (CAS3+ ISTA4* version) all keys lost with Yanhua mini ACDP through OBD downgrade. Car did not start, the […]
Yanhua Mini ACDP BMW MSV80 Asks for A51E License?
One of Yanhua mini ACDP users was trying to read BMW MSV80 DME ISN with module 3 and interface board but failed. ACDP Mini says device […]
Autel IM608 Pro BMW EWS3 Replacement (Read/Write)
The BMW/mini Cooper EWS3 module is damaged and you would like to read date off the prossesor chip and then if you save it in […]
How to Install Yanhua BMW FEM/BDC Clip Adapter?
The 2022 new version Yanhua BMW FEM/BDC clip adapter is used to read 95128/95256 chip without soldering when pre-processing BMW FEM/BDC module. Function: No […]
AK90+ Cable Information
There are two different (mirrored) MCU adapter cables being distributed with AK90+ models. Some have a black wire as pin 1 and some have the […]
Autel IM608 BMW EWS3 Response Timeout Solution
Question: I failed to read BMW 2004 model EWS3 immo data with Autel IM608 Pro. Follow the instruction but gives a response timeout error. Solution: […]
Tips to Program BMW Mini Remote with Bar Code with Autel IM508 IM608
Finally got the bar bmw/mini code remote to work with Autel IM608 (as well as IM508) so thought I would share. To find the option […]
Autel IM608 BMW CAS4 5M48H Chip Unlock Failed Solution
Question: Anybody come across this issue? I’m trying to read DFlash or PFlash Cas4 on an F10 BMW 5M48H -with Autel IM608 outcome it reaches […]
Autel IM508 Cannot Upload CAS Dump Error Code 4096 Solution
Problem: Why autel im508 always get this error when i load dump from CAS3+ or any CAS dump? File version error code 4096. Failed to […]
Can I Use Autel MaxiSys BMW ENET Cable with IM608?
Anyone use an old Autel maxisys BMW ENET cable adapter with MaxiIM IM608? Yes. You can use this cable, BMW F and G body program […]
2011 BMW 135i CAS3+ ISTAP All Keys Lost with Autel IM608
2011 BMW 135i all keys lost was done with autel maxiim im608! Tried first to do all keys lost through IMMO status failed because of […]
Autel IM608 BMW 116 FEM Asks to Restore EEPROM Data?
I have BMW 116 2014 FEM. Autel IM608 says that version information and that I must restore eeprom data first! someone has reopen fem and […]
Can Autohex Read BMW MSV70 on Bench?
Can Autohex II Read BMW MSV70 on Bench? Autohex does not require open msv70 ecu to read isn. Check the wiring diagram connect wiring […]
Hextag Programmer Clone BMW ME 9.2.2 ECU Success
BMW 7 series 2004 ME 9.2.2 ECU clone boot mode (BDM mode) ok with hextag programmer. It is done in boot mode because factory mode […]
What Tool to Add BMW 2015 S1000RR Motorcycle Key 4D 80bit?
Can the OBDSTAR Bike tool program key immo BMW 2015 S1000RR? Add key not all keys lost. Transponder Tiris 4D+ (80 bit) Or any other […]
Hextag Failed to Read BMW MSV80 ISN Solution
We had a customer who failed to read this Ecu BMW MSV80 with Hextag in 3 modes. He was trying to retrieve ISN for all […]
How to Solve Autel IM608 Missing ‘Remote’ Function Menu?
Problem: I have a problem with my Autel IM608 XP400. It is missing the Remote function. XP400 is well connected. My software version is v3.50. […]
BMW FEM Not Communicate after Read/Write EEPROM with Autel IM608
I have read eeprom, modify eeprom and write eeprom modify with Autel IM608. After that replay clicking, try put original file and same problem and […]
Can I Unlock 2011 Mini Cooper Used Key PCF7945 with Autel IM608?
Is there any way to unlock a used key pcf7945 for a 2011 Mini Cooper using Autel IM608? It said unlocking failed. Solution: With im608 […]
How to Unlock BMW F Series PCF7953 Remote with CG Pro?
How-to: renew and unlock BMW F series CAS4 remote key with CGPro 9S12 programmer. CGDI BMW detected this used remote as Unlocked. Remove key shell and […]
How to Read BMW EDC17C50 ISN with Yanhua Mini ACDP?
Problem: Hi team, may you please assist. Under which ECU type must I read this with Yanhua Mini ACDP. I need to read Isn from this […]