How to Generate and Program Ssangyong Rexton 434MHz Remote Key?
Here is the step-by-step guide of making Ssangyong Rexton Remote 434 MHz using KD-X2 remote maker and matching that to the car using Xtool X100 […]
Here is the step-by-step guide of making Ssangyong Rexton Remote 434 MHz using KD-X2 remote maker and matching that to the car using Xtool X100 […]
Both CGDI Prog MB software and firmware can be updated online for free. The newest version is always available to download free on official website http://www.cgprogcar.com […]
Good news!!! Xtool X100 PAD2 released new Nissan software update with many European and Chinese new immo key programming models. Xtool Pad2 European Nissan […]
OBDSTAR X300 DP PLUS will soon release new big update-adding 2016 2017 IMMO models in May 2019. BIG Update: Citroen Berlingo key programming Renault Clio 4 […]
How-to: repair Mercedes W211 original EIS rolling code with CGDI Prog MB Benz key programmer. Rolling code : A rolling code (or sometimes called a hopping code) is […]
Report: Lonsdor K518ISE added a spare key (OEM key) to a 2017 DACIA Dokker 1.6 gasoline success Perfect work, pincode reading and key programming. The same […]
Problem: I was trying to program a VAG Passat 4th IMMO all keys lost with Autel MaxiIM IM608 via OBD, it failed me and gave […]
Car model: Audi A6 3.0 TDI 2011 Key type: 8E chip transponder Purpose: program dealer key when all keys lost Method: on the bench Devices used: […]
Have collected all about Audi a4 post-2004 RB8 cluster key learn/program using Xhorse VVDI2 or Abrites AVDI or Fly FVDI. Look here: Part 1: VVDI2 and Audi a4 […]
How-to: add a spare remote key card to Renault Megane III year 2009 to 2015 by using Autel MaxiIM IM608 key programmer. No doubt the smartest investment […]
Autohex II is the only tool that can unlock FEM/BDC without soldering, and it is the only tool that regenerates a secret file, and the only […]
Obdstar X300DP PLUS test report: Have programmed two new keys to 2012 Land Rover Discovery 4, when all keys are lost. Key master: Obdstar […]
BMW ISN Editor Software in Autohex II lets you read ISN from DME, match it with CAS. This is essential for DME or CAS replacement, Autohex reads […]
Do I need a FEM test platform to do FEM keys using VVDI2? The answer can be “yes or no”. That is, you can program a fem […]
Auro OtoSys IM600/ Autel MaxiIM IM608 released BIG update for IMMO! 500 EEPROM Chips added and 500 MCU chips added! V2.01 4/22/2019 IMM0_lmmo Progrann Version number V2. […]
Problem: Did anyone successfully programmed a used ELV on a Mercedes W246 2014 , its still FBS3. Emulator works no problem, but i cannot activate […]
OBDSTAR X300 DP PLUS update Chrysler IMMO Software to V31.01 on April 24th, 2019. Update Feature: Adds Chrysler 300C 2009-2012 Pin Code reading […]
Obdstar X300 Pro3, Good economy key programmer. Asian models are pretty good but you need to know what you’re doing to use it. . . […]
Yanhua Mini ACDP released new upgrade on April 18th, 2019. New update: Read/write ISN from new added DME models Read/Write N55 DME ISN (E […]
Question: Has anyone added another software to the Xtool x100 pad2 auto key programmer? Answer: Some Xtool Pad2 users has tested and confirmed working. […]
Why CGDI Prog BMW is one of the must-to-have BMW Devices ? No need DME ISN or Removing ISN when All Key Lost. Note: […]
Good news!!! Auro OtoSys IM600 and Autel MaxiIM IM608 adds Fiat pre-code beta testing software version on April 12th, 2019. IMMO Fiat V2.48.13 12/04/2019 1. […]
New test report: Yanhua MINI ACDP added a new key on a Rolls-Royce Ghost CAS4 system. No need to remove chip No need to cut […]
JMD Handy baby II key copy machine software released to V2.34 on April 10th, 2019. Handy Baby 2 V2.34 Update Features: Optimize IC/ID card […]
This is how to decode & cut a key and program or add a new key to Nissan Altima year 2006. If you have […]
Copyright © 2025 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com